Manual

MultiController II Installation
User Manual 3-11
Tally
1. The Tally input requires a DC voltage of between 10 V and 30 V to activate
the Tally LEDs. The pin out for the chassis mounted male 15 pin D connec-
tor is:
2. Connect the tally indicator signals from your switcher to the 15 pin D con-
nector on the MultiController II.
Tally Connector Pin # Signal
1Camera#1(-)
2Camera#2(-)
3Camera#3(-)
4Camera#4(-)
5Camera#5(-)
6Camera#6(-)
7 no connection
8 no connection
9 Camera #1 (+)
10 Camera #2 (+)
11 Camera #3 (+)
12 Camera #4 (+)
13 Camera #5 (+)
14 Camera #6 (+)
15 no connection
Tally Input