Owner's manual

Assembly Reference Table

#1 Left Ladder # 2 Center Ladder #3 Right Ladder #4 Spacer Bar #5 Floor Spacer Bar #6 Hardware Kit

IBR-L-3H-2C

1 1 1 6 2 1

IBR-L-3H-4C 1 3 1 6 2 1

IBR-L-3H-8C 1 7 1 6 2 1

Additional items you will need to supply for assembly include Wood Glue, a soft rubber mallet and a power drill.

For more information or to view our assembly video visit us at

www.sustainablewinecellars.com

Lower Individual Bottle Rack

Connectors are pre-installed.

IBR-L-3H-2C

IBR-L-3H-4C

IBR-L-3H-8C

Reference Models

Spacer Bar Hole.

PAGE 1
Lower Individual Bottle Rack Reference Models IBR-L-3H-2C Spacer Bar Hole. IBR-L-3H-4C Connectors are pre-installed. IBR-L-3H-8C Assembly Reference Table #1 Left Ladder # 2 Center Ladder #3 Right Ladder #4 Spacer Bar #5 Floor Spacer Bar #6 Hardware Kit IBR-L-3H-2C 1 1 1 6 2 IBR-L-3H-4C 1 3 1 6 2 1 1 IBR-L-3H-8C 1 7 1 6 2 1 Additional items you will need to supply for assembly include Wood Glue, a soft rubber mallet and a power drill.
PAGE 2
Lower Individual Bottle Rack Drops of glue in each Connector hole Step 3 Step 2 Step 1 Attach Left End Ladder to Support Bars Drops of glue in each Connector hole. Attach Right End Ladder Attach Center Ladders For stand-alone rack, attach pre-glued spacer bar here. Second, secure the rear spacer bars of both racks using small finish nails. Pre-drill nail holes to prevent splitting. OR DO NOT attach a top spacer bar to this position at this time.