Installation Guide

Installation (continue):
Step 3
A) Align your old door slab with the new one as it is shown on the picture below
then using a speed square or framing square transit the exact shape of the hinge to make a cut on
the new slab. Make sure the shapes will be transited with exactly same pattern.
B) Once the shapes are transferred, you’ll need to mark the exact location of how far the hinge will
rest on the edge of the new door. Using a pencil, trace around the hinge you will use on the door
edge
C) Using a chisel and a hammer, remove wood to make the hinge flush with the door edge.