Instructions / Assembly

Table Of Contents

Functional Description of Massager

This massager is in 6-point, composed of a manual control board, wire rod and motor. It is

available in 5 functional modes, and is provided with manual/automatic function, time

control and strong/weak control function.

I. Speciﬁcation of Massager

1. The required input voltage of the massager is 220V,50Hz.

2. The required output voltage of the massager is DC12v, 1.2A.

II. Graphic presentation of Controller

1. POWER: turn on/off selection key

2.INTENSITY: strong/weak selection key.

3. MODE: working mode selection key

4. BACK: back massage function selection key

5. LUMBAR: lumbar massage function selection key

6. THIGH: thigh massage function selection key

7. TIMER: set working time key

III. Operating Instructions

1.Insert the power into the DC socket

2.Press the POWER key to start the unit, when the unit will enter the ﬁrst mode to run for

15min in the medium step, with all the corresponding indicators illuminated.

3.Press the TIMER key, the unit's control time will switch between 15min, 30min and

60min.

4 . P r e s s t h e F U N C T I O N k e y t o s e l e c t d i f f e r e n t w o r k i n g m o d e s

(PULSE,PRESS,WAVE,AUTO,NORMAL)

5.Press the INTENSITY key to select the high and low the intensity of vibration.

6.Press the BACK, LUMBAR and THIGH key will to massage the different places of the

body

OPERATION GUIDE