Use and Care Manual

- 4 -
Features and Specifications
Purpose of the cooling units
WM-4510HZD cooling units are designed and used to provide a stable
temperature between 50~65 °F for a properly insulated and sized space.
The refrigerated space will maintain humidity within the range of 50~70%
RH.
These temperature and humidity ranges like in natural caves are
optimized for long term storage of wine.
Specialty of design
The unit is self-contained and all-in-one ready for use. No copper tubing
and drain line are required.
Patented control programming can adjust the humidity without an external
humidifier.
Both curved supply grille and front panel bring you dynamic style.
Backward-curved impeller fans can duct the supply air and exhaust air
each 50 ft in total.
Flexibility of installation
Adjustable speed evaporator fan allows for flexible installations: through-
wall with free-blow, through-wall with ductworks and remote-mount with
ductworks.
Quiet and high speed condenser exhaust fan selection makes it work at
both normal and extremely high ambient temperatures.
Availability of options
Crankcase heater protects the compressor from slugging damage when
the ambient temperature falls below 50°F.
Low cellar temperature activated cellar heater outlet for an electric heater
can be used in extreme low temperature condition to protect your wine
from freezing.
Low and high cellar temperature activated phone notification allows your
expensive wine protected all the time.
An independent humidifier can be hooked up to maintain the proper
humidity as the customer requires in extremely dry conditions.
Optional left or right towards supply grille, top exhaust, side or rear power
cord can meet your customized air supply and installation requirements.
The specifications and dimensions are listed as follows:
MODEL NO
CELLAR
SIZE
(cu ft)
AIR
FLOW
(cfm)
AIR FILTER
(“, nominal)
DUCT
(“)
DIMENSIONS (“)
WxW1xD
xD1xD2xH
ELECTRICAL
RATING
WEIGHT
(lb)
WM-4510HZD
1000
300
11.5x13.5x1
8
14.375x0.25x21.5
x1.25x1x20
115V/60Hz/8A
95