Use and Care Manual

WWW.VINOTEMP.COM

OPERATING YOUR WINE COOLER

CONTROLS

1. Light: turn the inner light ON or OFF.

2. ºF/ºC Selector: choose to display temperature setting in Fahrenheit or Celsius.

3. To view the set temperature at any time, please press the button. The set temperature

will temporarily flash in the LED display for 5 seconds.

4. Temperature display for the lower zone: the LED display will flash when setting the temperature.

When not setting the temperature (normal mode), this display will show the current temperature for

the lower zone.

5. Celsius or Fahrenheit: these lights indicate if the temperature is being shown in Celsius or

Fahrenheit.

6. Temperature display for the upper zone: the LED display will flash when setting the temperature.

When not setting the temperature (normal mode), this display will show the current temperature for

the upper zone.

7. UP: use this button to raise the temperature in 1 degree increments.

8. DOWN: use this button to lower the temperature in 1 degree increments.

9. Power: use this button to turn the wine cooler ON or OFF. To power OFF the cooler, press

for a minimum of 5 seconds. Press the same button to power ON.The LED display will show

the original temperature set prior to resetting the appliance.

10. Press this symbol to adjust the temperature for the lower zone.

11. Press this symbol to adjust the temperature for the upper zone.

TEMPERATURE ZONES

The wine cooler has two temperature zones. The recommended temperature setting for each zone is:

• Upper zone (40°- 56°F)

• Lower zone (54°- 65°F)