Use and Care Manual

Shelves
Do not cover racks with aluminum
foil or any other material that will
prevent adequate air circulation
within the cabinet.
9
To prevent damaging the door gasket,
make sure to have the door all the way
opened when pulling shelves out of the rail
compartment. For easy access to the
bottles, you must pull the shelves
approximately 1/3 out of the rail
compartment.
To remove the shelves out of the rail, pull
each shelf approximately 1/3 out, lift the
whole shelf as shown in the Fig. A / Fig. B.
Hold on to both rails and push the shelf
until the notch aligns with the metal nail
on each side of the shelf track, lift the
shelf
then pull the
shelf out towards you.
REPLACING COLD CATALYST FILTER
1.Pull away the shelf in the area where the
Cold Catalyst Filter is to be installed.
.
2.Replace the new Cold Catalyst Filter to its
original position.
Remove 2 screws.