A PROUD HERITAGE OF EXPERIENCE & QUALITY BEVERAGE COOLER VT-BC34 TS O W N E R ’ S M A N U A L W W W . V I N O T E M P .
General Operating Instructions Remove all external and internal packaging from your beverage cooler. Be sure that all parts have been included before discarding any packaging materials. You may want to keep the box and packing materials for use at a later date. Upon receipt and inspection of unit, the supply cord must be replaced if it is damaged. Contact our customer service at 1-800-777-8466 or info@vinotemp.com. • • • Let the unit rest UNPLUGGED for 24 hours once you have it placed in your home.
Table of Contents PARTS AND SPECIFICATIONS..........................................4 IMPORTANT SAFETY INSTRUCTIONS ................................5 CORD INSTRUCTIONS....................................................6 BEVERAGE COOLER INSTALLATION..................................6 OPERATING INSTRUCTIONS............................................7 TEMPERATURE CONTROL................................................7 INSTALLING AND REMOVING SHELVES ............................8 CLEANING AND CARE...........
PARTS AND SPECIFICATIONS 1. 2. 3. 4. 5. 6. 4 Control Panel Hinge Cover Light Standard Shelf Display Shelf Foot Type Item Number 1 Temp. VT-BC34 TS Dimension (HxWxD) 33"×19"×19.3" Weight Power Consumption Cooling System 49 Lbs 0.0858 kW.h/24h R134a Ambient Temp. Range 50～110°F Temperature Range 40～65°F Rated Voltage Rated Frequency Input Power 120V 60Hz 85W W W W . V I N O T E M P .
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be followed to reduce the risk of fire, electric shock, and personal injury. 1. Use this appliance only as described in this manual. Other uses are not recommended and may cause fire, electric shock or injury. 2. This product is intended for indoor, household use. 3. To protect against electric shock, do not immerse unit, plug or cord in water or other liquids. Avoid locating the unit in moist areas. 4.
CORD INSTRUCTIONS For your protection, this unit should be properly grounded. Unit is equipped with a 3-conductor cord set that has a molded 3-prong groundingtype plug, and should be used in combination with a properly connected grounding-type outlet as shown in figure A. It is not recommended to use this beverage cooler with an extension cord or power board. Please ensure that the appliance is plugged directly into the electrical outlet.
OPERATING INSTRUCTIONS 1. 2. 3. 4. 5. 6. Gently place/slide the racks into the beverage cooler. Determine the best temperature setting to use. Place beverage containers inside the cooler. Plug the power cord into a standard grounded electrical outlet. Limit the frequency of opening the door to conserve energy and maintain proper storage temperature. You can turn the interior light on and off by touching the button labeled with a light on the control panel.
INSTALLING AND REMOVING SHELVES To prevent damaging the door gasket, make sure to have the door completely opened when pulling the shelves out of the rail compartment. • For easy access to the storage content, you must pull the shelf conservatively out of the rail compartment; however this unit was designed with a plastic post on each side of the shelf track to prevent bottles from falling. • When removing the shelf out of the inner rail, make sure to remove all items first.
CLEANING AND CARE • • • • • • Always unplug the beverage cooler before cleaning. Do not use benzene, scrubbing brushes or chemical cleaners as these will damage the unit. Use only a mild, nonabrasive cleanser to clean the exterior of the cabinet. Clean the stainless steel door and handle by wiping with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water. Wash the racks with a mild detergent solution.
TROUBLESHOOTING You can solve many common beverage cooler problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before contacting Vinotemp at info@vinotemp.com. SYMPTOM Door will not close properly. Unit does not operate—does not have power Power is ON but the unit will not cool. POSSIBLE CAUSE • • • • • • • • • • • • Fan is always running. • • Vibrations • Check to make sure the beverage cooler is level.
TERMS OF SALE AND WARRANTY Vinotemp International (“Seller”) and the person or entity that acquires these goods from Seller (“Purchaser”) hereby fully agree to the following terms and conditions of the sale: Shipping fees are the responsibility of the Purchaser whether freight prepaid or freight collect.
SERVICE & IMPORTANT NOTICE Upon receipt and inspection of unit, the supply cord must be replaced if it is damaged. Contact our customer service at 1-800-777-8466 or info@vinotemp.com. The manufacturer has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice. WARNING: Please do not place the unit within reach of children. For adult use only. Contact info@vinotemp.com with any questions or visit: www.vinotemp.com 17621 S.
