Operating instructions

9
17621 South Susana Road, Rancho Dominguez, California 90221
[e-mail]
TROUBLESHOOTING GUIDE
You can solve many common beverage cooler problems easily, saving you the
cost of a possible service call. Try the suggestion below to see if you can solve
the problem before contacting Vinotemp at [e-mail].
PROBLEM POSSIBLE CAUSE
Door will not close
properly.
• The beverage cooler is not level.
• The shelves are out of position.
• The door was reversed and not properly installed.
• The door gasket is dirty.
Unit does not
operate—does not
have power
• Check that unit is plugged into the wall socket.
• Make sure the wall socket has power. If outlet is controlled
by a wall switch, make sure switch is set to on. Test wall
socket functionality by testing another electrical appliance
in the power socket.
Power is ON but
the unit will not
cool.
• Make sure there are at least 3 to 5 bottles in the unit.
When using the unit for the first time, it can take up to 24
hours to reach the desired temperature.
• If the room temperature is above 90°F (32°C), the unit
will not get below 51°F (11°C). Humidity does not affect
the cooling ability of the unit.
• To achieve accurate temperature control, the unit should
not be used or operated in any of the following locations:
o In a sunny place
o In a room with poor air circulation such as a garage
near another heat-producing appliance such as a
dishwasher, oven or refrigerator.
o With an outlet shared with a refrigerator, as the
refrigerator will drain power from the beverage cooler.
o In a cabinet or closet.
• Make sure the cooling vents are not obstructed.
Fan is always
running.
• This is simply a function of the cooling system. The lower
the setting, the more the fan will run. If the room is
warmer than 90°F (32°C), it will run more.
• The unit has been designed to run continuously when
operating at the lower temperatures.
Vibrations • Check to make sure the beverage cooler is level.