Operating instructions

TEMPERATURE CONTROL
IMPORTANT: In order to operate efficiently, this product should be in an
environment with an ambient temperature of less than 90°F (32°C).
Temperature preset:
For your convenience, the manufacturer has pre-set the temperature of the unit
at 48°F (9°C).
Setting the temperature:
You can manually adjust the temperature. Simply press the “ ” button on the
control panel to decrease the temperature and the “ ” button to increase the
temperature by 1 degree increments inside the beverage cooler. The
temperature range for this unit is from 40°F (4°C) to 65°F (18°C).
When the cabinet temperature is too low, the LED will display “LL”. When the
temperature is too high, it will display “HH”. The “ER” display shows when there
has been a power disruption.
CLEANING AND CARE
• Always unplug the beverage cooler before cleaning.
• Do not use benzene, scrubbing brushes or chemical cleaners as these will
damage the unit.
• Use only a mild, nonabrasive cleanser to clean the exterior of the cabinet.
• Clean the stainless steel door and handle by wiping with a warm water and
baking soda solution. The solution should be about 2 tablespoons of baking
soda to a quart of water.
• Wash the racks with a mild detergent solution.
• Always dry all parts with a clean dry cloth before plugging the beverage
cooler back into the receptacle.
MOVING YOUR BEVERAGE COOLER
• Always unplug the beverage cooler before moving.
• Always remove all beverages before moving the beverage cooler.
• Securely tape down all loose items (shelves) inside your appliance.
• Turn the leveling legs up to the base to avoid damage.
• Tape the door shut.
• Be sure the beverage cooler stays in the upright position during
transportation
• Protect the outside of appliance with a blanket or similar item when moving
as needed.
7
17621 South Susana Road, Rancho Dominguez, California 90221
[e-mail]