User`s manual

V1.0 – Feb-09 User’s Manual Page 7 of 18
Update Driver
Disable
Uninstall
Scan for hardware changes
Properties
Figure 2: Disabling of Microsoft Serial BallPoint
(3) Either assure that the on-module GPS antenna has good view to the sky or con-
nect the included GPS antenna to the EVA1035-H via the external antenna con-
nector and make sure this active antenna has a good view to the sky! Make sure
the right antenna input is activated by setting the ANT_SW DIP to the “OFF” po-
sition fgor the on module antenna or to the “ON” position for the external an-
tenna.
(4) To start the GPS Cockpit software which visualizes the NMEA output data com-
ing from the GPS receiver, copy all files from the included CD ROM “Tools/GPS
Cockpit” to a folder of you choice on your PC. Then double click the GPSC.exe
file. The GPS cockpit software starts without additional software installation.
(5) Now you need to activate the correct port within GPS Cockpit. You can do this
by selecting “COM port connection”. A detailed description of the GPS Cockpit
software is included on the CD ROM. In any case, the following window will ap-
pear:
Figure 3: GPS Cockpit communication window - blank
Activate “Terminal 1”, choose the COM port to which the GPS receiver is con-
nected (verify in your system settings - device manager, which communication
port is used for this USB serial connection), in our example COM2 at 4800 baud
(default setting for the EVA1035-H), and click on “OK”: