User`s manual

V1.0 – Feb-09 User’s Manual Page 6 of 18
2 Handling Precautions
The EVA1035-H contains components that are sensitive to electrostatic discharge
(ESD). Please handle with appropriate care.
3 Quick Start (using USB connection)
(1) Connect the EVA1035-H with your PC using the included USB cable.
(2) When the PC asks for drivers select the folder “Tools\Drivers” on the included
CD ROM. Note that two drivers need to be installed, the EVA1035-H FTDI driver
and the USB serial driver.
Note: During the driver installation process your Windows system will probably
notify you, that the driver did not pass Windows logo testing with a warning:
Figure 1: Windows driver installation warning
Note: After successful driver installation Windows might interpret the data com-
ing over the serial interface as a serial ballpoint mouse! Your mouse pointer can
start jumping around. To stop this, disable the according device using your de-
vice manager. Leave the EVA1035-H kit connected and press and keep press-
ing the reset button. You will find the device under “Mice and other pointing de-
vices”. Use a right click to open the sub-menu and disable the device.