Specifications

For further information, please contact Mr. Christian Fröhling.
Sintron Vertriebs GmbH, Südring 14, 76473 Iffezheim, Telephone: [phone]
e-mail: [e-mail], www.vincent-highend.de
In the power supply, a toroidal transformer provides sufficient power. To keep the signal constant,
w
e use for the "buffering" Elcos with a total capacity of 13600 µF. The final gain in the output stage is
taken over by four additional Toshiba transistors operating in Class AB mode.
For connecting various sources, the SV-200 has two analog inputs and two digital inputs (1 x optical,
1 x coaxial). For connecting a recording device and a power amplifier or active subwoofer, a Rec output
and a Pre output are available. Of course, a high-quality remote control is included in the delivery and
completes the classy appearance.
Frequency Response: 20 Hz – 20 kHz ±0.5 dB
20 Hz – 50 kHz ±2 dB
Nominal Outpupt Power to 8 Ohm: 2 x 25 Watt
T.H.D.: < 0.1%
Input Sensitivity: 220 mV
Signal-to-Noise: > 72 dB
Input Impedance: 47 KOhm
Inputs: 2 x Stereo RCA, 1 x optical,
1 x Coax
Outputs: 1 x Stereo Rec Out, 1 x Stereo
Pre Out, 2 x 2 Speaker terminals,
2 x Power Control (3.5 mm jack)
Tubes: 2 x 6N1 tube
Max. Power Consumption: 125 Watt
Weight: 5 kg
Color: Black or Silver
Dimensions (W x H x D): 210 x 95 x 320 mm
Specifications
SV-200
Connections
tube Line
Product information
SV-200
Hybrid full amplifier