Specifications

2288
Vincent
10. AUDIO OUTPUTS:
analogue audio signal outputs
Either the RCA connectors or the XLR sockets are
connected to the relevant input of the amplifier,
preamplifier etc. It is not necessary to also con-
nect one of the digital signal outputs (11).
11. DIGITAL OUTPUTS:
digital audio signal outputs
If the amplifier, receiver or preamplifier is equip-
ped with a digital coaxial or optical digital input
connector, the relevant CD player signal output
may be connected to this. It is not necessary to
connect an analogue (10) and a digital signal
output (11) at the same time.
12. AC power connector and fuse holder
To establish the power supply, connect the plugs
of the power cable to the device and to a 230V
AC wall outlet. The small plastic housing beneath
the plug opening holds the fuse. Refer to the secu-
rity precautions.
REAR VIEW
10 11 12