Service manual
Table Of Contents
- VIZIO L42HDTV10A,GV42L_HDTV Service Manual
- 01-FEATURES
- 02-SPECIFITION
- 03-ON SCREEN DISPLAY
- 04-FACTORY PRESET TIMINGS
- 05-PIN ASSIGNMENT
- 06-MAIN BOARD I/O CONNECTIONS
- 07-THEORY OF CIRCUIT OPERATION
- 08-WAVEFORMS
- 09-TROUBLE SHOOTING
- 10-BLOCK DIAGRAM
- 11-SPARE PATRS LIST
- 12-1COMPLETE PARTS LIST_FOR L42 HDTV10A
- 12-2COMPLETE PARTS LIST_FOR GV42L HDTV
- MAIN BOARD CIRCUIT DIAGRAM_FOR L42 HDTV10A
- MIAN BOARD CIRCUIT DIAGRAM_FOR GV42L HDTV
- MAIN BOARD PCB LAYOUT_FOR L42HDTV10A(LG/AUO)
- MAIN BOARD PCB LAYOUT_FOR GV42L HDTV_LG
- ASSEMBLY EXPLOSION DRAWING_FOR L42HDTV10A_AUO
- ASSEMBLY EXPLOSION DRAWING_FOR L42HDTV10A_LG
- ASSEMBLY EXPLOSION DRAWING_FOR GV42L HDTV_LG
CONFIDENTIAL – DO NOT COPY
Page 7-19
File No. SG-0198
BLOCK DIAGRAM
1. COMMAND DEFINITIONS
Device operations are selected by writing specific address and data sequences into the
command register. Writing incorrect address and data values or writing them in the
improper sequence will reset the device to the read mode. Table 5 defines the valid
register command sequences. Note that the Erase Suspend (B0H) and Erase Resume
(30H) commands are valid only while the Sector Erase operation is in progress.