Service manual
Table Of Contents
- VIZIO GV47L FHDTV10A SERVICE MANUAL
- 01-FEATURES
- 02-SPECIFICATION
- 03-ON SCREEN DISPLAY
- 04-FACTORY PRESET TIMINGS
- 05-PIN ASSIGNMENT
- 06-MAIN BOARD I/O CONNECTIONS
- 07-THEORY OF CIRCUIT OPERATION
- 08-EAVEFORMS
- 09-TROUBLE SHOOTING
- 10-BLOCK DIAGRAM
- 11-SPARE PARTS LIST
- 12-COMPLETE PARTS LIST
- MAIN BOARD CIRCUIT DIAGRAM
- MAIN BOARD PCB LAYOUT
- ASSEMBLY EXPLOSION DRAWING
CONFIDENTIAL – DO NOT COPY
Page 2-4
File No. SG-0208
9-3. HANDLING PRECAUTIONS FOR PROTECTION
(1) The protection film is attached to the bezel with a small masking tape. When the protection
film is peeled off, static electricity is generated between the film and polarizer. This should be
peeled off slowly and carefully by people who are electrically grounded and with well
ion-blown equipment or in such a condition, etc.
(2) When the module with protection film attached is stored for a long time, sometimes there
remains a very small amount of glue still on the bezel after the protection film is peeled off.
(3) You can remove the glue easily. When the glue remains on the bezel surface or its vestige is
recognized, please wipe them off with absorbent cotton waste or other soft material like
chamois soaked with normal-hexane.