Service manual

ManualsBrandsVINC ManualsTVVIZIO GV42LFHDTV10A_AUO

Service Manual

V, Inc

320A Kalmus Drive Costa Mesa, CA 92626

TEL : +714-668-0588 FAX :+714-668-9099

Top Confidential

Model #: VIZIO VX32L HDTV

Summary of content (137 pages)

PAGE 1
Service Manual Model #: VIZIO VX32L HDTV V, Inc 320A Kalmus Drive Costa Mesa, CA 92626 TEL : +714-668-0588 FAX :+714-668-9099 Top Confidential
PAGE 2
Table of Contents CONTENTS PAGE Sections 1. Features 1-1 2. Specifications 2-1 3. On Screen Display 3-1 4. Factory Preset Timings 4-1 5. Pin Assignment 5-1 6. Main Board I/O Connections 6-1 7. Theory of Circuit Operation 7-1 8. Waveforms 8-1 9. Trouble Shooting 9-1 10. Block Diagram 10-1 11. Spare parts list 11-1 12. Complete Parts List 12-1 Appendix 1. Main Board Circuit Diagram 2. Main Board PCB Layout 3.
PAGE 3
VINC Service Manual VIZIO VX32L HDTV COPYRIGHT © 2000 V, INC. ALL RIGHTS RESERVED. IBM and IBM products are registered trademarks of International Business Machines Corporation. Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc. VINC and VINC products are registered trademarks of V, Inc. VESA, EDID, DPMS and DDC are registered trademarks of Video Electronics Standards Association (VESA). Energy Star is a registered trademark of the US Environmental Protection Agency (EPA).
PAGE 4
Chapter 1 Features 1. Built in TV channel selector for TV viewing 2. Simulatnueous display of PC and TV images 3. Connectable to PC’s analog RGB port 4. Built in S-video, HDTV, composite video, HDMI and TV out 5. Built in auto adjust function for automatic adjument of screen display 6. Smoothing function enables display of smooth texts and graphics even if image withresolution lower than 1366x768 is magnified 7. Picture In Picture (PIP) funtion to show TV or VCR/DVD images 8.
PAGE 5
Chapter 2 Specification 1. LCD CHARACTERISTICS LC320W01 Item Specification Active Screen Size 31.51(800.4mm) inch diagonal Outline Dimension 760.0mm(H) x 450.0mm(V) x 48.0mm(D) (Typ.) Pixel Pitch 0.17025mm x 0.51075mm xRGB Pixel Format 1366 (R,G,Bx3) x 768 Display Color 16.7 M (8-bit + FRC for R,G,B) Luminance, White 500 cd/m2 (Typ) Viewing Angle(L/R/U/D) 89/89/89/89 Power Consumption 84 Watt (Typ.) (Vdd line +CCFL line)(at 3.
PAGE 6
5. POWER SUPPLY Power Consumption: 180W MAX Power OFF: to less than 3W MAX 6.Speaker Output 10W (max) X2 7. ENVIRONMENT 7-1. Operating Temperature: 5c~35c (Ambient) 7-2. Operating Humidity: Ta= 35 °C, 90%RH (Non-condensing) 7-3. Operating Altitude: 0 - 14,000 feet (Non-Operating) 8. DIMENSIONS (Physical dimension) Width: 797.00 mm. Depth: 593.00mm Height: 263.7mm 9. WEIGHT (Physical weight) a. Net: 15.0+/-0.5kgs b. Gross: 20+/-0.5kgs Please pay attention to the followings when you use this TFT LCD module.
PAGE 7
(5) Acetic acid type and chlorine type materials for the cover case are not desirable because the former generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break by electro-chemical reaction. (6) Do not touch, push or rub the exposed polarizes with glass, tweezers or anything harder than HB pencil lead. And please do not rub with dust clothes with chemical treatment. Do not touch the surface of polarizer for bare hand or greasy cloth.
PAGE 8
9-3. HANDLING PRECAUTIONS FOR PROTECTION (1) The protection film is attached to the bezel with a small masking tape. When the protection film is peeled off, static electricity is generated between the film and polarizer. This should be peeled off slowly and carefully by people who are electrically grounded and with well ion-blown equipment or in such a condition, etc.
PAGE 9
Chapter 3 On Screen Display Main unit button Power MENU CH ▲ CH ▼ VOL + VOL Input TV Source A. PICTURE： a. PICTURE MODE (CUSTOM/ STANDARD / MOVIE / GAME) b. BACKLIGHT (0~100) c. BRIGHTNESS (0~100) d. CONTRAST (0~100) e. COLOR (0~100) f. TINT (-32~32) g. SHARPNESS (0~100) h. COLOR TEMPERATURE (CUSTOM/COOL/NORMAL/WARM) i. ADVANCED VIDEO i-1. DNR(OFF/LOW/MEDIUM/STRONG) i-2. BLACK LEVEL EXTENDER (ON/OFF) i-3.
PAGE 10
B. AUDIO： a. VOLUME (0~100) b. BASS (0~100) c. TREBLE (0~100) d. BALANCE (-50~50) e. SURROUND (ON/OFF) f. SPEAKERS (ON/OFF) C. TV： a. TUNER MODE (ANTENNA/CABLE) b. AUTO SEARCH (RUN) c. SKIP CHANNEL (TABLE) d. TIME ZONE (HAWALL/EASTTERN/INDIANA/CENTRAL/MOUNTAIN/ARIZONA/PACIFIC/ALA SKA) e. Daylight Saving(ON/OFF) D. SETUP： a. LANGUAGE (ENGLISH/FRENCH/SPANISH) b. SLEEP TIMER (OFF/30/60/90/120) c. ANALOG CC (OFF/CC1/CC2/CC3/CC4) d. DIGITAL CC(OFF/SERVICE1/ SERVICE2/ SERVICE3/ SERVICE4/ SERVICE5/ SERVICE6) e.
PAGE 11
e-7. WINDOW COLOR (GREEN/BLUE//RED/CYAN/YELLOW/MAGENTA/BLACK/WHITE) e-8. WINDOW OPATITY (SOLID/TRANSLUCENT/TRANSPARENT) f. RESET ALL SETTING E. PARENTAL： a. PASSWORD a-1. CHANNEL BLOCK a-2. TV RATING a-3. MOVIE RATING a-4. BLOCK TV UNRATED a-5. ACCESS CODE EDIT RGB Mode A. PICTURE ADJUST： a. AUTO PICTURE (Run) b. BACKLIGHT (0~100) c. BRIGHTNESS (0~100) d. CONTRAST (0~100) e. COLOR TEMPERATURE(CUSTOM, 6500K, 9300K) f. H-SIZE (0~255) g. H-POSITION (0~100) h. V-POSITION (0~100) i. FINE TUNE (0~31) B.
PAGE 12
C. SETUP： a. LANGUAGE (ENGLISH/FRENCH/SPANISH) b. SLEEP TIMER (OFF/30/60/90/120) RESET ALL SETTING AV COMPONENT MODE AV-C、AV-S、COMPONENT A. PICTURE： a. PICTURE MODE (CUSTOM/ STANDARD / MOVIE / GAME) b. BACKLIGHT (0~100) c. BRIGHTNESS (0~100) d. CONTRAST (0~100) e. COLOR (0~100) f. TINT (-32~32) g. SHARPNESS (0~100) h. COLOR TEMPERATURE (CUSTOM/COOL/NORMAL/WARM) i. ADVANCED VIDEO i-1. DNR(OFF/LOW/MEDIUM/STRONG) i-2. BLACK LEVEL EXTENDER (ON/OFF) i-3.
PAGE 13
B. AUDIO： a. VOLUME (0~100) b. BASS (0~100) c. TREBLE (0~100) d. BALANCE (-50~50) e. SURROUND (ON/OFF) f. SPEAKERS (ON/OFF) D. SETUP： a. LANGUAGE (ENGLISH/FRENCH/SPANISH) b. SLEEP TIMER (OFF/30/60/90/120) c. RESET ALL SETTING E. PARENTAL： a. PASSWORD a-1. CHANNEL BLOCK a-2. TV RATING a-3. MOVIE RATING a-4. BLOCK TV UNRATED a-5. ACCESS CODE EDIT CONFIDENTIAL – DO NOT COPY Page 3-5 File No.
PAGE 14
HDMI MODE： A. PICTURE： a. PICTURE MODE (CUSTOM/ STANDARD / MOVIE / GAME) b. BACKLIGHT (0~100) c. BRIGHTNESS (0~100) d. CONTRAST (0~100) e. COLOR (0~100) f. TINT (-32~32) g. SHARPNESS (0~100) h. COLOR TEMPERATURE (CUSTOM/COOL/NORMAL/WARM) i. ADVANCED VIDEO i-1. DNR(OFF/LOW/MEDIUM/STRONG) i-2. BLACK LEVEL EXTENDER (ON/OFF) i-3. WHITE PEAK LIMITATOR (ON/OFF) i-4 CTI(OFF/LOW/MEDIUM/STRONG) i-5 FLESH TONE (ON/OFF) i-6 ADAPTIVE LUMA (ON/OFF) B. AUDIO： a. VOLUME (0~100) b. BASS (0~100) c. TREBLE (0~100) d.
PAGE 15
C. SETUP： a. LANGUAGE (ENGLISH/FRENCH/SPANISH) b. SLEEP TIMER (OFF/30/60/90/120) RESET ALL SETTING CONFIDENTIAL – DO NOT COPY Page 3-7 File No.
PAGE 16
Chapter4 Factory preset timings This timing chart is already preset for the TFT LCD analog & digital display monitors. Refresh Horizontal Vertical Horizontal Vertical Pixel rate Frequency Frequency Polarity Polarity Rate 640x480 60Hz 31.5kHz 59.94Hz N N 25.175 640x480 75Hz 37.5kHz 75.00Hz N N 31.500 800X600 60Hz 37.9kHz 60.317Hz P P 40.000 800x600 75Hz 46.9kHz 75.00Hz P P 49.500 800X600 85Hz 53.7kHz 85.06Hz P P 56.250 1024x768 60Hz 48.4kHz 60.
PAGE 17
Chapter5 Pin Assignment The TFT LCD analog display monitors use a 15 Pin Mini D-Sub connector as video input source. Pin Description 1 Red 2 Green 3 Blue 4 Ground 5 Ground 6 R-Ground 7 G-Ground 8 B-Ground 9 +5V for DDC 10 Ground 11 No Connection 12 (SDA) 13 H-Sync (Composite Sync) 14 V-Sync 15 (SCL) 1 5 6 11 CONFIDENTIAL – DO NOT COPY 10 15 Page 5-1 File No.
PAGE 18
HDMI CONNECT PIN ASSIGNMENT PIN SIGNAL ASSIGNMENT 1 TMDS Data2+ 2 TMDS Data2 Shield 3 TMDS Data2- 4 TMDS Data1+ 5 TMDS Data1 Shield 6 TMDS Data1- 7 TMDS Data0+ 8 TMDS Data0 Shield 9 TMDS Data0- 10 TMDS Clock+ 11 TMDS Clock Shield 12 TMDS Clock- 13 CEC 14 Reserved (N.C on device) 15 SCL 16 SDA 17 DDC/CEC Ground 18 +5V Power 19 Hot Plug Detect CONFIDENTIAL – DO NOT COPY Page 5-2 File No.
PAGE 19
Four-Pin mini DIN S-Video Connector a. Pin Assignment b. Signal Level Video (Y): Analog 0.1Vp-p/75Ω Video (C): Analog 0.286p-p/75 Sync (H+V): 0.3V below Video (Y) c. Frequency H: 15.734KHz V: 60Hz (NTSC) Signal Level Video (Y) : Analog 0.1Vp-p/75Ω Video (C) : Analog 0.286p-p/75Ω Sync (H+V): 0.3V below Video (Y) Frequency H: 15.734Khz V: 60HZ (NTSC) F-Type TV RF connector a. Signal Level 60dBµV typical b. System NTSC c. Frequency 55~801MHz (NTSC) PC connector 15 pin male D-sub connector a.
PAGE 20
HDMI Signal (HDMI): a. Pin Assignment Refer to HDNI Pin Assignment b. Type A c. Polarity Positive or Negative d. Frequency H: 15.734KHz V: 60Hz (NTSC-480i) H: 31KHz V: 60Hz (NTSC-480p) H: 45KHz V: 60Hz (NTSC-720p) H: 33KHz V: 60Hz (NTSC-1080i) Component signal Component a. Frequency H: 15.734KHz V: 60Hz (NTSC-480i) H: 31KHz V: 60Hz (NTSC-480p) H: 45KHz V: 60Hz (NTSC-720p) H: 33KHz V: 60Hz (NTSC-1080i) b. Signal level Y: 1Vp-p Pb: ±0.350Vp-p Pr: ±0.350Vp-p c.
PAGE 21
Chapter 6 Main Board I/o Connections J2 CONNECTION (TOP→BOTTOM) Pin Description 1 “LED WHITE” 2 “LED AMBER” 3 “+5V” 4 “+5V” 5 “IR” 6 “GND” 7 “GND” 8 “ADIN1” 9 “ADIN2” 10 “+3.3V” J1 CONNECTION (TOP→BOTTOM) Pin Description 1 “POWRSW” 2 “+12V” 3 “+12V” 4 “+12V” 5 “+12V” 6 “GND” 7 “GND” 8 “GND” 9 “+5V” 10 “+5V” 11 “+5V” 12 “PWM” 13 “BL ON/OFF” CONFIDENTIAL – DO NOT COPY Page 6-1 File No.
PAGE 22
Chapter 7 Theory of Circuit Operation The operation of D-SUB 15pin route The D-SUB 15pin is input analog signal to the MT5372 transfer A/D converter then generates the vertical and horizontal timing signals for display device. The operation of HDMII CON route .Then transfer to the MT5372, the MT5372 generates the vertical and horizontal timing signals for display device.
PAGE 23
MT5372 Application MT5372 is a highly integrated video and audio single chip processor for emerging HDTV-Ready LCD TV. It includes one 3D/2D TV Decoder recovering the best image from CVBS, and in addition, its analog input also support popular S-Video, Component, VGA video source. On-chip advanced motion adaptive de-interlacer (MDDitm) converts accordingly the interlace video into smooth non-flicking progressive motion pictures.
PAGE 24
CONFIDENTIAL – DO NOT COPY Page 7-3 File No.
PAGE 25
1. Video input a. Input Multiplexing 1.component X2 2.composite X2 3.s-videoX1 4.HDMI X1 5.VGA X1 6.RF&DTV X1 b. Input formats: 1.support HDTV 480i/480p/720p/1080p 2.support Y/C signal 1VP-P/75Ω 3.support Y/C signal 1VP-P/75Ω 4.support 480i/408p/720p/1080i/1080p 5.support VGA input up to 1366x168@60HZ 6.support RF NTSC system Frequency 55~801MHZ;DTV 480i/480p/720p/1080p 2. Decoder TVD 1.Single 2nd generation TV decoder 2.Automatic TV standard detection supporting NTSC, NTSC-4.43, 3.
PAGE 26
Digital port 1.1 digital port supporting DVI 24-bit RGB or CCIR-656/601 digital video input format 2.1 additional 8 bit digital port for ITU656 video format VBI 1.Dual VBI decoders for the application of V-Chip/Closed-Caption/XDS/ Teletext/WSS/VPS 2.Supporting external VBI decoder by YPrPb input 3.VBI decoder up to 1000 pages Teletext. 3. Support Formats: Support NTSC, NTSC-4.
PAGE 27
5. Microprocessor interface When power is supplied and power key is pressed then the rest circuit lets Reset to low state that will reset the MT5372 to initial state. After that the Reset will transits to high state and the MT5372 start to work that microprocessor executes the programs and configures the internal registers. The execution speed of CPU is 162 MHz.
PAGE 28
4.Scaling 2nd generation high resolution arbitrary ratio vertical/horizontal scaling of video, from 1/32X to 32X Advanced linear and non-linear Panorama scaling Programmable Zoom viewer Picture-in-Picture (PIP) Picture-Out-Picture (POP) 5.Display Advanced dithering processing for LCD display with 6/8/10 bit output 10bit gamma correction Supporting alpha blending for Video and two OSD planes Frame rate conversion 6.
PAGE 29
WM8776 Application The WM8776 is a high performance, stereo audio codec with five channel input selector. The WM8776 is ideal for surround sound processing applications for home hi-fi, DVD-RW and other audiovisual equipment. Etch ADC channel has programmable gain control with automatic level control. Digital audio output word lengths from 16-32 bits and sampling rates from 32kHZ to 96KHZ are supported. The DAC has an input mixer allowing an external analogue signal to be mixed with the DAC signal.
PAGE 30
2. DIGITAL AUDIO INTERFACE 1. Slave mode The audio interfaces operations in either slave mode selectable using the MS control bit. In slave mode DIN is always an input to the WM8776 and DOUT is always an output. The default is Slave mode. In slave mode (ms=0) ADCLRC, DACLRC, ADCBCLK, DACBCLK are input to the WM8776 DIN and DACLRC are sampled by the WM8776 on the rising edge of DACBCLK; ADCLRC is sampled on the rising edge of ADCBCLK. ADC data is output on DOUT and changes on the falling edge of ADCBCLK.
PAGE 31
The wm8776 has two possible device addresses, which can be selected using the CE pin In the VX32L LCD TV CE pin is High (device address is 36h) In the VX32L wm8776 has 2-wire interface 3. HDCP Decryption HDCP decryption contains all necessary logic to decrypt the incoming audio and video data. The decryption process is entirely controlled by the host microprocessor through a set sequence of register reads and wires through the DDC channel.
PAGE 32
TDA8946 Application In VX32L TV the TDA8946AJ is a dual-channel audio power amplifier with DC gain control. It has an output power of 2 10 W at an 8 load and a 12 V supply. Block diagram 1. Input configuration The TDA8946AJ inputs can be driven symmetrical (floating) as well as asymmetrical. In the asymmetrical mode one input pin is connected via a capacitor to the signal source and the other input is connected to the signal ground.
PAGE 33
2. Output power measurement The output power as a function of the supply voltage is measured on the output pins at THD = 10%,in the VX32L LCD TV Vcc=12V so we can see as shown in the following figure output about 7W. CONFIDENTIAL – DO NOT COPY Page 7-12 File No.
PAGE 34
3. Mode selection In the VX32L LCD TV TDA8946AJ has two functional modes, which can be selected by applying the proper DC voltage to pin MODE. 1. Mute — In this mode the amplifier is DC-biased but not operational (no audio output). This allows the input coupling capacitors to be charged to avoid pop-noise. The device is in mute mode when 3.5 V < VMODE < (VCC 1.5 V). 2. Operating — In this mode the amplifier is operating normally. The operating mode is activated at VMODE<1.0V. General Feature List : 1 .
PAGE 35
2 . Transport Demuxer : 1. Support 3 independent transport stream inputs 2. Support serial/parallel interface for each transport stream input 3. Support ATSC , DVB , and MPEG2 transport stream inputs. 4. Programmable sync detection. 5. Support DES/3-DES De-scramble. 6. 96 PID filter and 128 section filters. 7. Support TS recording via IEEE1394 interface. 3 . MPEG2 Decoder : 1. Support dual MPEG-2 HD decoder or up to 8 SD decoder. 2. Complaint to MP@ML , MP@HL and MPEG-1 video standards. 4 .
PAGE 36
8 . Main Display : 1. Mixing two video and three OSD and hardware cursor. 2. Contrast/Brightness adjustment. 3. Gamma correction. 4. Picture-in-Picture( PIP ). 5. Picture-Out-Picture( POP ). 6. 480i/576i/480p/576p/720p/1080i output 9 . Auxiliary Display : 1. Mixing one video and one OSD. 2. 480i/576i output. 10 . TV Encoder : 1. Support NTSC M/N , PAL M/N/B/D/G/H/I 2. Macrovision Rev 7.1.L1 3. CGMS/WSS. 4. Closed Captioning. 5. Six 12-bit video DACs for CVBS , S-video or RGB/YPbPr output. 11 .
PAGE 37
14 . Audio : 1. Support Dolby Digital AC-3 decoding. 2. MPEG-1 layer I/II , MP3 decoding. 3. Dolby prologic II. 4. Main audio output : 5.1ch + 2ch ( down mix ) 5. Auxiliary audio output : 2ch. 6. Pink noise and white noise generator. 7. Equalizer. 8. Bass management. 9. 3D surround processing include virtual surround. 10. Audio and video lip synchronization. 11. Support reverberation. 12. SPDIF out. 13. I2S I/F. 15 . Peripherals : 1. Three UARTs with Tx and Rx FIFO , two of them have hardware flow control.
PAGE 38
MX29LV320BTTC (Flash) Application : The MX29LV320AT/B is a 32-mega bit Flash memory organized as 4M bytes of 8 bits and 2M words of 16 bits. MXIC's Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The MX29LV320AT/B is packaged in 48-pin TSOP and 48-ball CSP. It is designed to be reprogrammed and erased in system or in standard EPROM programmers.
PAGE 39
BLOCK DIAGRAM CONFIDENTIAL – DO NOT COPY Page 7-18 File No.
PAGE 40
BUS OPERATION--1 Legend: L=Logic LOW=VIL, H=Logic High=VIH, VID=12.0 0.5V, VHH=11.5-12.5V, X=Don't Care, AIN=Address IN, DIN=Data IN,DOUT=Data OUT Notes: 1. When the WP/ACC pin is at VHH, the device enters the accelerated program mode. See "Accelerated Program Operations" for more information. 2.The sector group protect and chip unprotect functions may also be implemented via programming equipment. See the "Sector Group Protection and Chip Unprotection" section. 3.
PAGE 41
BUS OPERATION--2 Notes: 1.Code=00h means unprotected, or code=01h protected. 2.Code=99 means factory locked, or code=19h not factory locked. WRITE COMMANDS/COMMAND SEQUENCES To program data to the device or erase sectors of memory , the system must drive WE and CE to VIL, and OE to VIH.An erase operation can erase one sector, multiple sectors , or the entire device. A "sector address" consists of the address bits required to uniquely select a sector.
PAGE 42
TABLE A. MX29LV320AT/B COMMAND DEFINITIONS Legend: X=Don't care RA=Address of the memory location to be read. RD=Data read from location RA during read operation. PA=Address of the memory location to be programmed. Addresses are latched on the falling edge of the WE or CE pulse. PD=Data to be programmed at location PA. Data is latched on the rising edge of WE or CE pulse. SA=Address of the sector to be erased or verified. Address bits A20-A12 uniquely select any sector.
PAGE 43
STANDBY MODE MX29LV320AT/B can be set into Standby mode with two different approaches. One is using both CE and RESET pins and the other one is using RESET pin only. When using both pins of CE and RESET, a CMOS Standby mode is achieved with both pins held at Vcc ±0.3V. Under this condition, the current consumed is less than 0.2uA (typ.). If both of the CE and RESET are held at VIH, but not within the range of VCC ± 0.3V, the device will still be in the standby mode, but the standby current will be larger.
PAGE 44
If RESET is asserted during a program or erase operation, the RY/BY pin remains a "0" (busy) until the internal reset operation is complete, which requires a time of tREADY (during Embedded Algorithms). The system can thus monitor RY/BY to determine whether the reset operation is complete. If RESET is asserted when a program or erase operation is not executing (RY/BY pin is "1"), the reset operation is completed within a time of tREADY (not during Embedded Algorithms).
PAGE 45
WRITE OPERATION STATUS The device provides several bits to determine the status of a write operation: Q2, Q3, Q5, Q6, Q7, and RY/BY.Table B and the following subsections describe the functions of these bits. Q7, RY/BY, and Q6 each offer a method for determining whether a program or erase operation is complete or in progress. These three bits are discussed first. Table B. Write Operation Status Notes: 1.Performing successive read operations from the erase-suspended sector will cause Q2 to toggle. 2.
PAGE 46
Fig C. COMMAND WRITE OPERATION Fig D. READ TIMING WAVEFORMS CONFIDENTIAL – DO NOT COPY Page 7-25 File No.
PAGE 47
Fig E. RESET TIMING WAVEFORM CONFIDENTIAL – DO NOT COPY Page 7-26 File No.
PAGE 48
DDR SDRAM (NT5DS16M16CS-5T) Application: Functional Description The 256Mb DDR SDRAM is a high-speed CMOS, dynamic random-access memory containing 268, 435, 456 bits. The 256Mb DDR SDRAM is internally configured as a quad-bank DRAM. The 256Mb DDR SDRAM uses a double-data-rate architecture to achieve high-speed operation. The double-data-rate architecture is essentially a 2n prefetch architecture, with an interface designed to transfer two data words per clock cycle at the I/O pins.
PAGE 49
Pin Configuration - 400mil TSOP II (x4 / x8 / x16) CONFIDENTIAL – DO NOT COPY Page 7-28 File No.
PAGE 50
Mode Register Operation Operating Mode The normal operating mode is selected by issuing a Mode Register Set Command with bits A7-A12 to zero, and bits A0-A6 set to the desired values. A DLL reset is initiated by issuing a Mode Register Set command with bits A7 and A9-A12 each set to zero, bit A8 set to one, and bits A0-A6 set to the desired values. A Mode Register Set command issued to reset the DLL should always be followed by a Mode Register Set command to select normal operating mode.
PAGE 51
Extended Mode Register The Extended Mode Register controls functions beyond those controlled by the Mode Register; these additional functions include DLL enable/disable, bit A0; output drive strength selection, bit A1; and QFC output enable/disable, bit A2 (NTC optional). These functions are controlled via the bit settings shown in the Extended Mode Register Definition.
PAGE 52
Truth Table a: Commands 1. CKE is high for all commands shown except Self Refresh. 2. BA0, BA1 select either the Base or the Extended Mode Register (BA0 = 0, BA1 = 0 selects Mode Register; BA0 = 1, BA1 = 0 selects ,Extended Mode Register; other combinations of BA0-BA1 are reserved; A0-A12 provide the op-code to be written to the selected Mode Register.) 3. BA0-BA1 provide bank address and A0-A12 provide row address. 4.
PAGE 53
Write The Write command is used to initiate a burst write access to an active (open) row. The value on the BA0, BA1 inputs selects the bank, and the address provided on inputs A0-Ai, Aj (where [i = 9, j = don’t care] for x8; where [i = 9, j = 11] for x4) selects the starting column location. The value on input A10 determines whether or not Auto Precharge is used.
PAGE 54
Operations: Reads Subsequent to programming the mode register with CAS latency, burst type, and burst length, Read bursts are initiated with a Read command. The starting column and bank addresses are provided with the Read command and Auto Precharge is either enabled or disabled for that burst access. If Auto Precharge is enabled, the row that is accessed starts precharge at the completion of the burst, provided tRAS has been satisfied.
PAGE 55
Random Read Accesses: CAS Latencies (Burst Length = 2, 4 or 8) CONFIDENTIAL – DO NOT COPY Page 7-34 File No.
PAGE 56
Read Command Writes Write bursts are initiated with a Write command, as shown in timing figure Write Command on following: The starting column and bank addresses are provided with the Write command, and Auto Precharge is either enabled or disabled for that access. If Auto Precharge is enabled, the row being accessed is precharged at the completion of the burst. For the generic Write commands used in the following illustrations, Auto Precharge is disabled.
PAGE 57
The new Write command can be issued on any positive edge of clock following the previous Write command. The first data element from the new burst is applied after either the last element of a completed burst or the last desired data element of a longer burst which is being truncated. The new Write command should be issued x cycles after the first Write command, where x equals the number of desired data element pairs (pairs are required by the 2n prefetch architecture).
PAGE 58
Data Output (Read) CONFIDENTIAL – DO NOT COPY Page 7-37 File No.
PAGE 59
Chapter8 Waveforms PC MODE(1366X768 60HZ) CH1 H-sync (R209); CH2 H-sync (L52) CH1 V-sync (R213); CH2 V-sync (L53) CONFIDENTIAL – DO NOT COPY Page 8-1 File No.
PAGE 60
CH1 R (R203) CH1 R (C95) CH1 B (R199) CH1 B (C92) CONFIDENTIAL – DO NOT COPY Page 8-2 File No.
PAGE 61
CH1 G (R195) CH1 G (C89) CH1 VGAL (R207); CH2 VOL CONFIDENTIAL – DO NOT COPY Page 8-3 File No.
PAGE 62
CH1 VGAR (R208) ; CH2 VOL AV&TV MODE (AV1/AV2/TV) VIDEO CH1 TV CONFIDENTIAL – DO NOT COPY Page 8-4 File No.
PAGE 63
CH1 AV1 CH1 AV1L IN ; CH2 AV L (Speaker) CONFIDENTIAL – DO NOT COPY Page 8-5 File No.
PAGE 64
CH1 AV1 IN R CH1 ; CH2 AV_R (Speaker) AV2 CONFIDENTIAL – DO NOT COPY Page 8-6 File No.
PAGE 65
CH1 AV2L IN ; CH2 AV L (Speaker) CH1 AV2 IN R ; CH2 AV_R (Speaker) CONFIDENTIAL – DO NOT COPY Page 8-7 File No.
PAGE 66
COMPONENT MODE CH1 YPBPR1_Y CH1YPBPR1_L IN CH2 L (Speaker) CONFIDENTIAL – DO NOT COPY Page 8-8 File No.
PAGE 67
CH1 YPBPR1_R IN CH2 R (Speaker) CH1 YPBPR2_Y CONFIDENTIAL – DO NOT COPY Page 8-9 File No.
PAGE 68
CH1YPBPR2_L IN CH1 YPBPR2_R IN CH2 L (Speaker) CH2 R (Speaker) CONFIDENTIAL – DO NOT COPY Page 8-10 File No.
PAGE 69
HDMI 1 CH1 RX1; CH2 RX1-B HDMI 2 CH1 RX1; CH2 RX1-B CONFIDENTIAL – DO NOT COPY Page 8-11 File No.
PAGE 70
Chapter 9 Trouble shooting MONITOR DISPLAY NOTHING (PC MODE) Start N0 LED is lighted 1. 2. 3. 4. Is Power board output +5VSB &DV12? Is J1 connector good? Is DC-DC OK? Is U1 (+5V) working ok? Yes N0 LED is lighting? It is in power saving 1. Check video cable 2. Is the timing supported? 3. Check sync input 4. Check VGASOG rout if analog (SOG) Yes N0 Is backlight on? 1.Check J1 PIN 1 2.Is inverter ok? 3.Is Power Board ok? Yes Yes N0 U14 no data out? It means data to LVDS 1.
PAGE 71
(TV, COMPOSITE VIDEO1,, S-VIDEO) IS NOT DISPLAY CORRECTLY Start N0 1.Check video 2.Check DVD player Input signal good? Yes N0 U14 input correct? 1.Check P11(VIDEO&S) signal 2.Check signal between P1 and U14 (IF IN AV mode) 3.Check Tuner &U13 (IF TV mode) 4.Check P1 (IF S-Video) Yes N0 1. Check U14 DV33&DV12&AV15&AV12 2.Check X1 is OK? U14 output correct? Yes N0 LVDS output correct? 1.Check LVDS LINE 2.Check U14 clock (27MHz) 3.Check LVDS 5V or 12V Yes 1.Chcak J7 Connect is good? 2.
PAGE 72
(COMPONENT) IS NOT DISPLAY CORRECTLY Start N0 1.Check video 2.Check host’s setting Input signal good? Yes N0 1.Check signal between P1 2.Check power 12V& 5v P1 input correct? Yes N0 1.Check signal between U14&P1 2.Check U14 Clock (27MHZ) 3. Check U14 DV33&DV12&AV15&AV12 U14 input correct? Yes N0 LVDS output correct ? 1.Check U14 2. Check LVDS 5V or 12V Yes 1.Is J7 connected good? 2.Is panel working ok? END CONFIDENTIAL – DO NOT COPY Page 9-3 File No.
PAGE 73
(HDMI) IS NOT DISPLAY CORRECTLY Start N0 1.Check video 2.Check host’s setting Input signal good? N0 U31 input correct? 1.Check p10&p11 connect 2.Check signal between U31 and U19 Yes N0 U11 no data out ? 1.Check U11 power 2.Check between signal U19 and U11 3.Check U19 clock 27MHZ Yes Yes 1.Is J6 connected good? 2.Is panel working ok? END CONFIDENTIAL – DO NOT COPY Page 9-4 File No.
PAGE 74
TROUBLE OF DC-DC CONVERTER Start N0 J7 PIN10,11,12 The voltage is about + 5V 1.Check power board 2.Check power cable connection J7 Yes N0 The voltage is about + 12V while power switch on 1.J7 connection good 2.Check J7 Pin1 is up to 3V? 3.Check power board J7 PIN 2,3,4 Yes N0 U1 pin 5 6 7 8 The voltage is about +5V while power switch on 1.J1 connection good 2. Check U11 GPIO_7 Pin Yes N0 U4 pin2 The voltage is about +3.3V 1.J1 to connection good? 2.
PAGE 75
TROUBLE OF DDC READING Start N0 Support DDC1/2B 1.Analog cable ok? 2.Check signal (U20 to P3) 3.Check U20 Voltage 4.Is compliant protocol? Analog DDC OK? Yes N0 HDMIDDC OK? Support DDC1/2B 1.Analog cable ok? 2.Check signal (U32 to P10) 3. Check signal (U34 to P11) 4.Is compliant protocol? Yes END CONFIDENTIAL – DO NOT COPY Page 9-6 File No.
PAGE 76
Chapter 10 Block Diagram System Block Diagram 32” WXGA panel Digital Video bus AC IN Power Board Speakers J2 J7 J1 J6 Main Board J4 □□□□□ P6 P7 P8 P3 P4 P1 P2 P11 U12 P1 P9 Keypad/IR Board RJ11 HDMIX2 RCA RGB earphone YPBPRX2RCAX2 AV1 Tuner SPDIF AudioRCA OUT The TV system block diagram is powered by power board that transforms AC source of 100V~240V AC +/- 10% @ 50/60 HZ into DC 5V & 12V& 24Vsource. The main board receives different types of video signal into the MT5372 Ic.
PAGE 77
Main Board Block Diagram P5 service P6 HDMI1 Video Signal Audio Signal U22 Communicate Signal PI3HDMI412FT Control Pin P7 HDMI2 U24 U23 HDMI1 EDID EEPROM P8 P3 P4 U25 HDMI2 EDID EEPROM PI5C3257 DVI AUDIO U28 U21 VGA EDID EEPROM DSUB RL+ L- DSUB AUDIO U27 CD4052 Pb1 L1 R1 L2 R2 U18 U19 16M x 16 DDR 16M x 16 DDR P2 U17 Y2 I2C 24C16 SYS EEPROM I2C Pb2 U14 Pr2 Panel MT5372 AV1 J4 TDA8946AJ AUDIO AMP.
PAGE 78
Chapter 11 Spare Parts List PART NO DESCRIPTION LOC FUSE 125V/3A SMD (R451003) 0320-4000-0142 POWER CORD 110V UL/CSA 1800mm BLK N.M. (VINC) 1 0321-0000-0411 AV CABLE RCA(Y/W/R) 1800mm BLK (VINC) 1 0360-1000-0420 POWER INDUCTOR L:10uH 1.44A L26 1 0390-6005-2103 SCHOTTKY DIODE 0.
PAGE 79
PART NO 1925-1900-0610 DESCRIPTION LOC QTY CARTON JOINT (TM-32V) 4 1925-2000-0030 Polishing Cloth VIZIO P42 HDTV10A 1 1936-1100-8780 B/C LBL VIZIO VX32L HDTV 1 1936-1300-1550 SERIAL NO.
PAGE 80
Chapter 12 Complete Parts List 9632-8500-3053 ITEM M/S LCD TV MONITOR 32'' VX32L HDTV (LG)(ABS,433C) LOCATION PART NO. DESCRPTION QTY 1 3632-0022-0312 PACKING ASS'Y VX32L HDTV 1 2 3632-0052-0331 PANEL ASS'Y VX32L HDTV (LG)(ABS,433C) 1 CONFIDENTIAL – DO NOT COPY Page 12-1 File No.
PAGE 81
3632-0022-0312 PACKING ASS'Y VX32L HDTV ITEM M/S LOCATION PART NO.
PAGE 82
3632-0052-0331 PANEL ASS'Y VX32L HDTV (LG)(ABS,433C) ITEM M/S 1 2 SS 3 LOCATION PART NO. DESCRPTION QTY 0211-0320-1261 LCD MODULE 32.0'' LC320W01-SL01 (LG.PHILIPS)(China) 0211-0320-1361 LCD MODULE 32.0'' LC320W01-SL01 (LG.
PAGE 83
ITEM M/S LOCATION PART NO. DESCRPTION QTY 44 1721-0045-1020 TAP. SCREW-TP #4.5*10.0L, Ni 2 45 1721-3003-0920 TAP. SCREW-MF M3.0*9.0L, Ni 2 46 1721-4104-1220 TAP. SCREW-TRF #4.0*12.
PAGE 84
3632-0012-0156 ITEM M/S DISPLAY BD ASS'Y VX32L HDTV LOCATION PART NO. DESCRPTION QTY 1 363200120156M DISPLAY BD ASS'Y VX32L HDTV MI 1 2 363200120156S DISPLAY BD ASS'Y VX32L HDTV SMD 1 CONFIDENTIAL – DO NOT COPY Page 12-5 File No.
PAGE 85
3632-0022-0146 ITEM M/S CONNECTOR BD ASS'Y VX32L HDTV LOCATION 1 PART NO. DESCRPTION QTY 0171-3871-0171 PCB CONN. BD FR4 80*22*1.6t D (VX32L HDTV)(1:10) 1 2 JC1 0451-2000-1266 WAFER 2.0mm 12P 90' DIP KINK (M242612R) L-F 1 3 JC2 0300-3041-0090 S-VIDEO 4PIN 90' (2MJ-0602-005) L-F 1 4 JC3 0302-9030-0114 RCA JACK 1ROW 3I/O (Y-W-R) L-F 1 5 LC1 0370-0001-4773 CHIP BEAD CORE 80ohm (MCB1608H800GA) LF 1 CONFIDENTIAL – DO NOT COPY Page 12-6 File No.
PAGE 86
3632-0022-0393 ACCESSARY ASS'Y VX32L HDTV ITEM M/S LOCATION PART NO. DESCRPTION QTY 1 0320-4000-0142 POWER CORD 110V UL/CSA 1800mm BLK N.M. (VINC) 1 2 0321-0000-0411 AV CABLE RCA(Y/W/R) 1800mm BLK (VINC) 1 3 0602-3000-0020 Battery Zn-Carbon 1.5V AA 2 4 0980-0303-5020 REMOTE CONTROL 66700BA0-010-R LF 1 5 1925-1100-0230 PE BAG 320*230*0.04T 2 6 1925-1100-0280 PE BAG (180W*290L*0.04t)(PE-LD)(ACC.
PAGE 87
3632-0062-0150 MAIN BD ASS'Y VX32L HDTV_LG (HDCP) ITEM M/S LOCATION PART NO. DESCRPTION QTY 1 363200620150A MAIN BD ASS'Y VX32L HDTV LG AI 1 2 363200620150M MAIN BD ASS'Y VX32L HDTV_LG MI 1 3 363200620150S MAIN BD ASS'Y VX32L HDTV_LG SMD 1 CONFIDENTIAL – DO NOT COPY Page 12-8 File No.
PAGE 88
3642-0022-0189 IR BD ASS'Y GV42L HDTV ITEM M/S LOCATION PART NO. DESCRPTION QTY 1 364200220189M IR BD ASS'Y GV42L HDTV MI 1 2 364200220189S IR BD ASS'Y GV42L HDTV SMD 1 CONFIDENTIAL – DO NOT COPY Page 12-9 File No.
PAGE 89
363200120156M DISPLAY BD ASS'Y VX32L HDTV MI ITEM M/S 1 LOCATION PART NO. DESCRPTION QTY 0451-1250-1066 WAFER 1.25mm 10P 90' DIP KINK (M240110R) L-F 0451-1250-1063 WAFER 1.25mm 10P 90' KINK (A1251WR0-10P) L-F CON3 0451-1250-0366 WAFER 1.25mm 3P 90' DIP KINK (M24013R) L-F 0451-1250-0363 WAFER 1.25mm 3P 90' KINK (A1251WR0-3P) L-F J2 0451-2000-0466 WAFER 2.0mm 4P 90' DIP KINK (M24264R) L-F 0451-2003-0463 WAFER 2.
PAGE 90
363200120156S DISPLAY BD ASS'Y VX32L HDTV SMD ITEM M/S LOCATION 1 2 3 CD1 SS 4 5 CD2 SS 6 7 CD3 SS 8 9 CD4 SS PART NO. DESCRPTION QTY 0174-1770-1791 PCB DISPLAY BD K1 150*25*1.6t (VX32L HDTV)(1:10) 1 0111-3104-1617 C/M Multi. 0.1uF 16V X7R 0402 1 0112-3104-1617 C/M Multi. 0.1uF 16V X7R 0402 0111-3104-1617 C/M Multi. 0.1uF 16V X7R 0402 0112-3104-1617 C/M Multi. 0.1uF 16V X7R 0402 0111-3104-1617 C/M Multi. 0.1uF 16V X7R 0402 0112-3104-1617 C/M Multi. 0.
PAGE 91
363200620150A MAIN BD ASS'Y VX32L HDTV_LG AI ITEM M/S LOCATION PART NO. DESCRPTION QTY 1 CE1 0103-1221-1311 E/C VT 220uF 25V 105'C F-T (8*11.5mm) 1 2 CE10 0103-1221-1311 E/C VT 220uF 25V 105'C F-T (8*11.5mm) 1 3 CE11 0103-1221-1311 E/C VT 220uF 25V 105'C F-T (8*11.5mm) 1 4 CE12 0103-6471-1312 E/C HF 470uF 25V 105'C (10*16mm) 1 5 CE13 0103-1100-1511 E/C VT 10uF 50V 105'C F-T (5*11mm) 1 6 CE14 0103-1221-1311 E/C VT 220uF 25V 105'C F-T (8*11.
PAGE 92
ITEM M/S LOCATION PART NO.
PAGE 93
363200620150M MAIN BD ASS'Y VX32L HDTV_LG MI ITEM M/S 1 2 SS 3 4 J2 SS 5 6 J4 SS 7 8 LOCATION J1 J6 SS PART NO. DESCRPTION QTY 0451-2000-1366 WAFER 2.0mm 13P 90' DIP KINK (M242613R) L-F 0451-2003-1363 WAFER 2.00mm 13P 90' KINK (A2001WR2-13P) L-F 0451-1250-1066 WAFER 1.25mm 10P 90' DIP KINK (M240110R) L-F 0451-1250-1063 WAFER 1.25mm 10P 90' KINK (A1251WR0-10P) L-F 0451-2000-1266 WAFER 2.0mm 12P 90' DIP KINK (M242612R) L-F 0451-2003-1263 WAFER 2.
PAGE 94
363200620150S MAIN BD ASS'Y VX32L HDTV_LG SMD ITEM M/S LOCATION PART NO. DESCRPTION QTY 1 363200620150B MAIN BD ASS'Y VX32L HDTV LG SMD BOT 1 2 363200620150T MAIN BD ASS'Y VX32L HDTV_LG SMD TOP 1 CONFIDENTIAL – DO NOT COPY Page 12-15 File No.
PAGE 95
364200220189M IR BD ASS'Y GV42L HDTV MI ITEM M/S 1 2 LOCATION JR1 SS PART NO. DESCRPTION 0451-2000-0466 WAFER 2.0mm 4P 90' DIP KINK (M24264R) L-F 0451-2003-0463 WAFER 2.00mm 4P 90' KINK (A2001WR2-4P) L-F QTY 1 3 UR1 0980-0200-2130 MODULE. IR RECEIVER (FM-6038LM-5AN) 1 4 UR1S 1701-1500-0360 IR HOLDER (TM-15A) 1 CONFIDENTIAL – DO NOT COPY Page 12-16 File No.
PAGE 96
364200220189S IR BD ASS'Y GV42L HDTV SMD ITEM M/S LOCATION 1 2 CR2 PART NO. DESCRPTION PCB IR BD FR4 66.5*12*1.6t D (GV42L HDTV)(1:20) 1 0111-3106-1614 C/M Multi. 10uF 16V X7R K 1206 1 3 SS 0111-3106-1114 C/M MULTI 10uF 10V X7R K 1206 4 SS 0112-3106-1614 C/M MULTI 10uF 16V X7R 1206 5 SS 0115-7106-1614 C/M MULTI 10uF 16V X7R 1206 6 7 CR3 SS QTY 0171-1671-0501 0111-3104-1617 C/M Multi. 0.1uF 16V X7R 0402 0112-3104-1617 C/M Multi. 0.
PAGE 97
363200620150B MAIN BD ASS'Y VX32L HDTV_LG SMD BOT ITEM M/S 1 2 SS 3 4 CB101 SS 5 6 CB102 SS 7 8 CB103 SS 9 10 CB104 SS 11 12 CB105 SS 13 14 CB106 SS 15 16 CB107 SS 17 18 CB108 SS 19 20 CB109 SS 21 22 CB111 SS 23 24 CB112 SS 25 26 CB113 SS 27 28 CB114 SS 29 30 CB115 SS 31 32 CB116 SS 33 34 CB117 SS 35 36 CB118 SS 37 38 CB119 SS 39 40 CB12 SS 41 42 43 LOCATION CB100 CB126 SS CB13 PART NO. DESCRPTION 0111-3104-1617 C/M Multi. 0.
PAGE 98
ITEM 44 M/S 45 46 CB130 SS 47 48 CB136 SS 49 50 CB137 SS 51 52 CB138 SS 53 54 CB139 SS 55 56 CB14 SS 57 58 CB140 SS 59 60 CB141 SS 61 62 CB142 SS 63 64 CB144 SS 65 66 CB145 SS 67 68 CB146 SS 69 70 CB147 SS 71 72 CB148 SS 73 74 CB149 SS 75 76 CB150 SS 77 78 CB151 SS 79 80 CB152 SS 81 82 CB153 SS 83 84 CB154 SS 85 86 CB156 SS 87 88 CB157 SS 89 90 LOCATION SS CB158 SS PART NO. DESCRPTION 0112-3104-1617 C/M Multi. 0.
PAGE 99
ITEM M/S 91 92 SS 93 94 CB160 SS 95 96 CB161 SS 97 98 CB162 SS 99 100 CB163 SS 101 102 CB164 SS 103 104 CB165 SS 105 106 CB166 SS 107 108 CB167 SS 109 110 CB168 SS 111 112 CB170 SS 113 114 CB175 SS 115 116 CB212 SS 117 118 CB213 SS 119 120 CB214 SS 121 122 CB215 SS 123 124 CB216 SS 125 126 CB217 SS 127 128 CB218 SS 129 130 CB219 SS 131 132 CB220 SS 133 134 CB221 SS 135 136 137 LOCATION CB159 CB222 SS CB223 PART NO. DESCRPTION 0111-3104-1617 C/M Multi. 0.
PAGE 100
ITEM 138 M/S 139 140 CB232 SS 141 142 CB233 SS 143 144 CB234 SS 145 146 CB235 SS 147 148 CB240 SS 149 150 CB241 SS 151 152 CB242 SS 153 154 CB243 SS 155 156 CB244 SS 157 158 CB245 SS 159 160 CB246 SS 161 162 CB39 SS 163 164 CB40 SS 165 166 CB46 SS 167 168 CB47 SS 169 170 CB48 SS 171 172 CB49 SS 173 174 CB50 SS 175 176 CB51 SS 177 178 CB52 SS 179 180 CB53 SS 181 182 CB54 SS 183 184 LOCATION SS CB57 SS PART NO. DESCRPTION 0112-3104-1617 C/M Multi. 0.
PAGE 101
ITEM M/S 185 186 SS 187 188 CB59 SS 189 190 CB60 SS 191 192 CB61 SS 193 194 CB62 SS 195 196 CB63 SS 197 198 CB64 SS 199 200 CB65 SS 201 202 CB66 SS 203 204 CB67 SS 205 206 CB68 SS 207 208 CB70 SS 209 210 CB71 SS 211 212 CB72 SS 213 214 CB73 SS 215 216 CB75 SS 217 218 CB77 SS 219 220 CB78 SS 221 222 CB79 SS 223 224 CB82 SS 225 226 CB83 SS 227 228 CB84 SS 229 230 231 LOCATION CB58 CB85 SS CB86 PART NO. DESCRPTION 0111-3104-1617 C/M Multi. 0.
PAGE 102
ITEM 232 M/S 233 234 CB87 SS 235 236 CB90 SS 237 238 CB93 SS 239 240 CB94 SS 241 242 CB95 SS 243 244 CB97 SS 245 246 CB98 SS 247 248 C132 SS 249 250 C20 SS 251 252 C23 SS 253 254 C26 SS 255 256 C27 SS 257 258 C28 SS 259 260 LOCATION SS C31 SS 261 D10 262 SS 263 SS PART NO. DESCRPTION 0112-3104-1617 C/M Multi. 0.1uF 16V X7R 0402 0111-3104-1617 C/M Multi. 0.1uF 16V X7R 0402 0112-3104-1617 C/M Multi. 0.1uF 16V X7R 0402 0111-3104-1617 C/M Multi. 0.
PAGE 103
ITEM M/S LOCATION PART NO. DESCRPTION QTY 279 R231 0130-2000-1654 RES. CF 200ohm 1/16W J 0402 1 280 R232 0130-2000-1654 RES. CF 200ohm 1/16W J 0402 1 281 R233 0130-2000-1654 RES. CF 200ohm 1/16W J 0402 1 282 R390 0130-1001-1654 RES. CF 1Kohm 1/16W J 0402 1 283 R391 0130-1001-1654 RES. CF 1Kohm 1/16W J 0402 1 284 R397 0130-2000-1654 RES. CF 200ohm 1/16W J 0402 1 285 R398 0130-2000-1654 RES. CF 200ohm 1/16W J 0402 1 286 R399 0130-2000-1654 RES.
PAGE 104
363200620150T MAIN BD ASS'Y VX32L HDTV_LG SMD TOP ITEM M/S LOCATION 1 2 3 CB1 SS 4 5 CB110 SS 6 7 CB120 SS 8 9 CB121 SS 10 11 CB122 SS 12 13 CB123 SS 14 15 CB124 SS 16 17 CB125 SS 18 19 CB127 SS 20 21 CB128 SS 22 23 CB129 SS 24 25 CB131 SS 26 27 CB132 SS 28 29 CB133 SS 30 31 CB134 SS 32 33 CB135 SS 34 35 CB143 SS 36 37 CB15 SS 38 39 CB155 SS 40 41 CB16 SS 42 43 CB169 SS PART NO. DESCRPTION QTY 0171-2272-2173 PCB MAIN BD FR4 340*140*1.
PAGE 105
ITEM M/S 44 45 SS 46 47 CB171 SS 48 49 CB172 SS 50 51 CB173 SS 52 53 CB174 SS 54 55 CB176 SS 56 57 CB177 SS 58 59 CB178 SS 60 61 CB179 SS 62 63 CB18 SS 64 65 CB180 SS 66 67 CB181 SS 68 69 CB183 SS 70 71 CB184 SS 72 73 CB185 SS 74 75 CB186 SS 76 77 CB187 SS 78 79 CB188 SS 80 81 CB189 SS 82 83 CB19 SS 84 85 CB190 SS 86 87 CB191 SS 88 89 90 LOCATION CB17 CB192 SS CB193 PART NO. DESCRPTION 0111-3104-1617 C/M Multi. 0.
PAGE 106
ITEM 91 M/S 92 93 CB194 SS 94 95 CB195 SS 96 97 CB196 SS 98 99 CB197 SS 100 101 CB198 SS 102 103 CB199 SS 104 105 CB2 SS 106 107 CB20 SS 108 109 CB200 SS 110 111 CB201 SS 112 113 CB202 SS 114 115 CB203 SS 116 117 CB204 SS 118 119 CB205 SS 120 121 CB206 SS 122 123 CB207 SS 124 125 CB208 SS 126 127 CB209 SS 128 129 CB21 SS 130 131 CB210 SS 132 133 CB211 SS 134 135 CB22 SS 136 137 LOCATION SS CB224 SS PART NO. DESCRPTION 0112-3104-1617 C/M Multi. 0.
PAGE 107
ITEM M/S 138 139 SS 140 141 CB226 SS 142 143 CB227 SS 144 145 CB228 SS 146 147 CB229 SS 148 149 CB23 SS 150 151 CB230 SS 152 153 CB231 SS 154 155 CB236 SS 156 157 CB237 SS 158 159 CB238 SS 160 161 CB239 SS 162 163 CB24 SS 164 165 CB247 SS 166 167 CB248 SS 168 169 CB25 SS 170 171 CB26 SS 172 173 CB27 SS 174 175 CB28 SS 176 177 CB29 SS 178 179 CB3 SS 180 181 CB30 SS 182 183 184 LOCATION CB225 CB31 SS CB32 PART NO. DESCRPTION 0111-3104-1617 C/M Multi. 0.
PAGE 108
ITEM 185 M/S 186 187 CB33 SS 188 189 CB34 SS 190 191 CB35 SS 192 193 CB36 SS 194 195 CB37 SS 196 197 CB38 SS 198 199 CB4 SS 200 201 CB41 SS 202 203 CB42 SS 204 205 CB43 SS 206 207 CB44 SS 208 209 CB45 SS 210 211 CB5 SS 212 213 CB55 SS 214 215 CB56 SS 216 217 CB69 SS 218 219 CB74 SS 220 221 CB76 SS 222 223 CB80 SS 224 225 CB81 SS 226 227 CB88 SS 228 229 CB89 SS 230 231 LOCATION SS CB96 SS PART NO. DESCRPTION 0112-3104-1617 C/M Multi. 0.
PAGE 109
ITEM M/S 232 233 SS 234 235 C1 SS 236 237 C10 SS 238 239 C100 SS 240 241 C101 SS 242 243 C104 SS 244 245 C105 SS 246 247 C106 SS 248 249 C107 SS 250 251 C111 SS 252 253 C116 SS 254 255 C117 SS 256 257 C118 SS 258 259 C119 SS 260 261 C121 SS 262 263 C122 SS 264 265 C123 SS 266 267 C124 SS 268 269 C126 SS 270 271 C127 SS 272 273 C128 SS 274 275 C129 SS 276 277 278 LOCATION CB99 C13 SS C130 PART NO. DESCRPTION 0111-3104-1617 C/M Multi. 0.
PAGE 110
ITEM 279 M/S 280 281 C131 SS 282 283 C14 SS 284 285 C15 SS 286 287 C157 SS 288 289 C158 SS 290 291 C16 SS 292 293 C164 SS 294 295 C17 SS 296 297 C19 SS 298 299 C2 SS 300 301 C21 SS 302 303 C22 SS 304 305 C24 SS 306 307 C25 SS 308 309 C29 SS 310 311 C30 SS 312 313 C32 SS 314 315 C37 SS 316 317 C40 SS 318 319 C41 SS 320 321 C42 SS 322 323 C44 SS 324 325 LOCATION SS C46 SS PART NO. DESCRPTION 0112-3104-1617 C/M Multi. 0.
PAGE 111
ITEM M/S 326 327 SS 328 329 C48 SS 330 331 C49 SS 332 333 C50 SS 334 335 C51 SS 336 337 C52 SS 338 339 C53 SS 340 341 C56 SS 342 343 C57 SS 344 345 C58 SS 346 347 C59 SS 348 349 C6 SS 350 351 C60 SS 352 353 C61 SS 354 355 C62 SS 356 357 C63 SS 358 359 C64 SS 360 361 C65 SS 362 363 C66 SS 364 365 C67 SS 366 367 C68 SS 368 369 C69 SS 370 371 372 LOCATION C47 C70 SS C71 PART NO. DESCRPTION 0111-3220-5107 C/M Multi.
PAGE 112
ITEM 373 M/S 374 375 C72 SS 376 377 C73 SS 378 379 C74 SS 380 381 C75 SS 382 383 C76 SS 384 385 C77 SS 386 387 C78 SS 388 389 C79 SS 390 391 C80 SS 392 393 C81 SS 394 395 C82 SS 396 397 C83 SS 398 399 C84 SS 400 401 C85 SS 402 403 C86 SS 404 405 C87 SS 406 407 C88 SS 408 409 C89 SS 410 411 C9 SS 412 413 C90 SS 414 415 C91 SS 416 417 C92 SS 418 419 LOCATION SS C93 SS PART NO. DESCRPTION 0112-3150-5107 C/M Multi.
PAGE 113
ITEM M/S 420 421 SS 422 423 C95 SS 424 425 C96 SS 426 427 C97 SS 428 429 C98 SS 430 431 LOCATION C94 C99 SS 432 D1 PART NO. DESCRPTION 0111-3103-1617 C/M Multi. 0.01uF 16V X7R K 0402 0112-3103-1617 C/M Multi. 0.01uF 16V X7R K 0402 0111-3103-1617 C/M Multi. 0.01uF 16V X7R K 0402 0112-3103-1617 C/M Multi. 0.01uF 16V X7R K 0402 0111-3509-5107 C/M Multi. 5PF 50V NPO 0402 0112-3509-5107 C/M Multi. 5PF 50V COG 0402 L-F 0111-3103-1617 C/M Multi. 0.
PAGE 114
ITEM M/S LOCATION PART NO. DESCRPTION QTY 467 L22 0370-0000-6452 CHIP BEAD CORE 80ohm (MLB-201209-0080A-N2) 1 468 L26 0360-1000-0420 POWER INDUCTOR L:10uH 1.44A 5.8x5.
PAGE 115
ITEM 514 M/S 515 516 Q15 SS 517 518 Q16 SS 519 520 Q17 SS 521 522 Q18 SS 523 524 Q19 SS 525 526 Q2 SS 527 528 Q21 SS 529 530 Q22 SS 531 532 Q23 SS 533 534 Q24 SS 535 536 Q25 SS 537 538 Q26 SS 539 540 Q3 SS 541 542 Q4 SS 543 544 Q5 SS 545 546 Q8 SS 547 548 LOCATION SS Q9 SS PART NO.
PAGE 116
ITEM M/S LOCATION PART NO. DESCRPTION QTY 561 RN22 0141-7509-3851 ARRAY RES. A(X) 75ohm 4R J 8P 1 562 RN23 0141-7509-3851 ARRAY RES. A(X) 75ohm 4R J 8P 1 563 RN24 0141-4709-3851 ARRAY RES. A(X) 47ohm 4R J 8P 1 564 RN25 0141-7509-3851 ARRAY RES. A(X) 75ohm 4R J 8P 1 565 RN26 0141-4709-3851 ARRAY RES. A(X) 47ohm 4R J 8P 1 566 RN27 0141-7509-3851 ARRAY RES. A(X) 75ohm 4R J 8P 1 567 RN28 0141-4709-3851 ARRAY RES. A(X) 47ohm 4R J 8P 1 568 RN29 0141-7509-3851 ARRAY RES.
PAGE 117
ITEM M/S LOCATION PART NO. DESCRPTION QTY 608 R130 0130-7509-1654 RES. CF 75ohm 1/16W J 0402 1 609 R131 0130-7509-1654 RES. CF 75ohm 1/16W J 0402 1 610 R133 0130-1002-1654 RES. CF 10Kohm 1/16W J 0402 1 611 R134 0130-2209-1654 RES. CF 22ohm 1/16W J 0402 1 612 R135 0130-1000-1654 RES. CF 100ohm 1/16W J 0402 1 613 R136 0130-2209-1654 RES. CF 22ohm 1/16W J 0402 1 614 R137 0130-2209-1654 RES. CF 22ohm 1/16W J 0402 1 615 R138 0130-1000-1654 RES.
PAGE 118
ITEM M/S LOCATION PART NO. DESCRPTION QTY 655 R176 0130-6809-1654 RES. CF 68 ohm 1/16W J 0402 1 656 R177 0130-7509-1654 RES. CF 75ohm 1/16W J 0402 1 657 R178 0130-1000-1654 RES. CF 100ohm 1/16W J 0402 1 658 R179 0130-0000-1654 RES. CF 0ohm 1/16W J 0402 1 659 R180 0370-0001-4773 CHIP BEAD CORE 80ohm (MCB1608H800GA) LF 1 660 R181 0130-6809-1654 RES. CF 68 ohm 1/16W J 0402 1 661 R182 0130-4702-1654 RES. CF 47Kohm 1/16W J 0402 1 662 R183 0130-7509-1654 RES.
PAGE 119
ITEM M/S LOCATION PART NO. DESCRPTION QTY 702 R221 0130-4701-1654 RES. CF 4.7Kohm 1/16W J 0402 1 703 R222 0130-0000-1654 RES. CF 0ohm 1/16W J 0402 1 704 R223 0130-0000-1654 RES. CF 0ohm 1/16W J 0402 1 705 R224 0130-3300-1654 RES. CF 330ohm 1/16W J 0402 1 706 R225 0130-3300-1654 RES. CF 330ohm 1/16W J 0402 1 707 R23 0130-5600-1654 RES. CF 560ohm 1/16W J 0402 1 708 R235 0130-1000-1654 RES. CF 100ohm 1/16W J 0402 1 709 R236 0130-1000-1654 RES.
PAGE 120
ITEM M/S LOCATION PART NO. DESCRPTION QTY 749 R279 0130-1002-1654 RES. CF 10Kohm 1/16W J 0402 1 750 R28 0130-1002-1654 RES. CF 10Kohm 1/16W J 0402 1 751 R280 0130-1002-1654 RES. CF 10Kohm 1/16W J 0402 1 752 R281 0130-1002-1654 RES. CF 10Kohm 1/16W J 0402 1 753 R282 0130-4701-1654 RES. CF 4.7Kohm 1/16W J 0402 1 754 R283 0130-4701-1654 RES. CF 4.7Kohm 1/16W J 0402 1 755 R284 0130-1002-1654 RES. CF 10Kohm 1/16W J 0402 1 756 R285 0130-1002-1654 RES.
PAGE 121
ITEM M/S LOCATION PART NO. DESCRPTION QTY 796 R34 0130-1100-1654 RES. CF 110ohm 1/16W J 0402 1 797 R340 0130-3908-1858 RES. CF 3.9ohm 1/8W J 0805 1 798 R341 0130-3908-1858 RES. CF 3.9ohm 1/8W J 0805 1 799 R342 0130-1002-1654 RES. CF 10Kohm 1/16W J 0402 1 800 R343 0130-4701-1654 RES. CF 4.7Kohm 1/16W J 0402 1 801 R344 0130-1002-1654 RES. CF 10Kohm 1/16W J 0402 1 802 R345 0130-1002-1654 RES. CF 10Kohm 1/16W J 0402 1 803 R346 0130-7509-1654 RES.
PAGE 122
ITEM M/S LOCATION PART NO. DESCRPTION QTY 843 R406 0130-1002-1654 RES. CF 10Kohm 1/16W J 0402 1 844 R408 0130-1002-1654 RES. CF 10Kohm 1/16W J 0402 1 845 R41 0130-1003-1654 RES. CF 100Kohm 1/16W J 0402 1 846 R42 0130-1001-1654 RES. CF 1Kohm 1/16W J 0402 1 847 R43 0130-1200-1654 RES. CF 120ohm 1/16W J 0402 1 848 R44 0130-1100-1654 RES. CF 110ohm 1/16W J 0402 1 849 R45 0130-1800-1654 RES. CF 180ohm 1/16W J 0402 1 850 R46 0130-1100-1654 RES.
PAGE 123
ITEM M/S LOCATION PART NO. DESCRPTION QTY 890 R94 0130-1002-1654 RES. CF 10Kohm 1/16W J 0402 1 891 R95 0130-1002-1654 RES. CF 10Kohm 1/16W J 0402 1 892 R96 0130-4701-1654 RES. CF 4.7Kohm 1/16W J 0402 1 893 R97 0130-4701-1654 RES. CF 4.7Kohm 1/16W J 0402 1 894 R98 0130-8201-1654 RES. CF 8.2Kohm 1/16W J 0402 1 895 R99 0130-0000-1654 RES.
PAGE 124
CAM Products 2000(TM): top.
PAGE 125
PAGE 126
PAGE 127
PAGE 128
PAGE 129
PAGE 130
PAGE 131
PAGE 132
PAGE 133
PAGE 134
PAGE 135
PAGE 136
PAGE 137