User Manual

VIMTAG SURVEILLANCE SOLUTION USER GUIDE
Page 49
Online upgrade
Online upgrade displays the current version number and shows if there is
a newer version. On a mobile device, you will see a red dot next to the
Setting icon identifying that there is a new upgrade available. To
download and install the latest software version, click Update.
Ideally, this field should display “No update available,” indicating that
your Vimtag device is using the latest upgrade available.
Restore to factory settings
If you click Restore, it will restore the camera to the factory defaults,
which can be helpful in case you have made changes to the camera and
want to cancel these changes.
Note: When choosing Restore to Factory Settings, you also have the
choice to keep or remove the network settings. If you do not keep the
network settings, then you will have to reenter the network information
to get the camera working on your network again. It is recommended
that you keep the network settings, and just restore the other parts of
the camera back to factory settings.
Restart device
Clicking Restart reboots the camera. It is the same as unplugging the
camera and plugging it back in again but is accomplished remotely.
Note: When the camera goes offline, such as when using the Restart
button, the snapshots are deleted if you do not have a storage location
specified (either VimBox or SD card).
If you have a VimBox or an SD card configured, the information is safe.
Many use the Restart button as a way to clear the images from their
camera quickly.