User Manual

VIMTAG SURVEILLANCE SOLUTION USER GUIDE
Page 40
can use the edge of a paperclip or pen to push it into place. It will not
damage the camera.
 If the camera does not recognize the SD card, remove the card and
unplug the camera. Put the SD card back in, plug the camera back in
and restart it. The camera will reboot, and then it should be
recognized.
Note: It is always recommended that you format the SD card after
inserting it into the camera.
The maximum recommended size card for the camera is 64 GB, which
should be able to record approximately 120 hours of video. At the end of
the 120 hours, the card will record over the oldest segments first.
When you go to the SD card settings, the card should be enabled by
default. If not, click ON. The following fields display the card information:
 Status – indicates the status of the SD card (options include: No SD
card, Mounted, or Unmounted)
 Capacity – which indicates the size of your SD card.
 Usage – Amount of used space.
 Valid – Amount of space remaining.
The following option buttons allow you to perform important actions on
the card: