User Manual

VIMTAG SURVEILLANCE SOLUTION USER GUIDE
Page 37
To enable guests to access the device, each guest must have a Vimtag
account created and the device added to that account. Once this is done,
the guest can either use Vimtag app or access the Vimtag website
interface. For more information, see Creating an Account.
Network
Warning: If you change the settings on this tab, it is possible that the
network can be disconnected.
The Network Tab enables you to choose the network interface that you
want to use - Ethernet or Wi-Fi. When you choose Ethernet, you can view
the MAC address, the network status, and the IP information.
Once your device is connected, it is recommended that you do not
change the settings or click Apply on the Network tab, as this is likely to
cause you to be disconnected from the Network.
Note: The Ethernet option will show up first. However, if you are
connected via Wi-Fi only, you will see that the Network status for Ethernet
is set to Not connected. When you switch to the Wi-Fi option, the Network
status will indicate that your network is Connected via Wi-Fi.
When you choose Wi-Fi, you can view the MAC address, mode, network
status, DNS, and IP information. You will also be able to choose Wi-Fi