User Manual

VIMTAG SURVEILLANCE SOLUTION USER GUIDE
Page 36
Device Admin Password
To change the Admin password, type in your old password in the top box,
then type in the new password below. Confirm your new password by
typing it in again, and then click Apply. You can change the password as
many times as needed.
Note: This is not the account password, but the password for the
specific device.
Each camera can have a different Admin password. You can choose to
give a person Admin permissions on a single camera, but not all of the
other cameras in your system, when you change the password through
this setting. You can also reset the password back to the default setting
(where the device password will return to be admin.
Device Guest Password
If you wish to grant someone access to your Vimtag solution, you can
assign them a device guest password, which can be disabled at any time.
Guests can view what the cameras are broadcasting and can move the
cameras, but they will not be able to make any changes in the settings or
use the remote microphone.
To create a device guest password, you will need to first enter your
Admin password, then create the guest password and confirm it. Click
Apply, and your guest password is created. The guest password added in
this section will only work for the selected camera. As previously
described, guests will have limited abilities and permissions.