User Manual

VIMTAG SURVEILLANCE SOLUTION USER GUIDE
Page 19
Deleting a Device
There are two ways to delete a device from your account:
 On a mobile device, you can simply do a long press on the camera,
and then select delete from the menu that pops up.
 Select the device that you would like to delete and open the Settings
page of that device. Click Delete.
Installing the Camera on Walls and Ceilings
Before mounting the Vimtag camera on a wall or ceiling, you should first
add the camera (device) to your account. This will enable you to see the
area that the camera can cover when installed in a location.
Once you have decided on a location, it is important to check the quality
and angle of the image before actually mounting the camera. Consider
several key factors when choosing a location:
 Do you want the camera to be visible or would you prefer that it be
located in a more discreet location?
 Are there objects blocking the camera’s view?
 Is it high enough off the ground to be safe from being knocked down
or touched by people, children, animals, etc.?
 Is the Wi-Fi signal strong in the location where you intend to install
the device?
Once you have verified that you have optimized the camera location and
that using the Vimtag app, you can maximize the viewing area, affix the
mounting bracket tray to the wall using a screwdriver and the appropriate
screw. You can then place the camera on the mounting bracket tray and
secure it by tightening the screws by hand.