Installation Guide

0 9

Step 4. GROUTING

4.1

GROUT, CLEAN, CURE

You should ensure that you have a grout that is

appropriate for the installation (See Step 1.4). Mix as

directed by the manufacturer.

Working in 2-3 square foot areas, spread the grout on the

tile surface, then using the grout float move the grout at

45 degree angles to the grout lines. This ensures a smooth

even grout joint.

Quickly clean up excess from the face of the tiles using a

soft sponge and clean water. Avoid pulling the grout from

the grout line by wiping at an angle to all grout lines.

Be sure to get the tile surface as clean as possible, to

prevent grout staining.

Let cure for at least 24 hours, or longer depending on the

grout manufacturer's recommendations or humidity level.

Step 5. Final Sealing

5.1

SEAL FOR LASTING PROTECTION

As with the first sealing, ensure the installation is clean

and dry before proceeding. The final coat(s) of sealant will

also protect grout lines from staining. As before, follow the

sealant manufacturer's instructions.