Operation Manual

17
Battery removal teChniCal sPeCifiCation
2
BATTERY REMOVAL
At the end of the product’s or battery’s life the battery should be removed
for disposal and recycling.
Follow these instructions to remove and reinstall the battery:
1 Turn off the power switch and turn the ro-
bot upside down.
2 Push both flaps inwards and pull up until
battery pack comes out.
3 Reinstall battery by pushing until you hear
a clicking sound.
WARNING: NEVER touch both the metal battery terminals at the same
time with any metal objects as this will short circuit the battery and may
create sparks that can cause small burns.
TECHNICAL SPECIFICATION
Battery type 14.4V DC, 1700 mAh NiMH
Charging time 4-5 hours
Charger output 24V DC
Charger input 100-240V AC
Unit Average Power 19W ~ 25W
Suction Power 3.00W
Airflow 63.6dm
3
/min
Dust Capacity 0,25L
Unit Size 34cmx9cm
Downloaded from www.Manualslib.com manuals search engine