Operation Manual
13
CleaninG main BrUshes
21
3 5
Product contains electronic parts. Do not submerge it or spray it with wa-
ter. Clean with a dry cloth only.
WARNING: to buy new filters, please contact Vileda in the UK on
08457697356.
CLEANING MAIN BRUSHES
1 Turn off the power switch and turn the robot upside down on a flat sur-
face.
2 Use a cross-head screwdriver to remove the fixing screw on the right.
3 Take out the main brush, rubber brush and brush coupler together as
shown in the illustration.
4 Remove all hair and dirt from both brushes. Clean brushes chamber.
5 Wipe out dirt on the metal shaft and bearing of the brush coupler as indi-
cated in the illustration.
6 Put brush coupler and brushes back.
7 Tighten the screw.
Main brushes do not need to be cleaned after each use. However, reg-
ular cleaning is recommended to avoid excessive build up of hair that
could damage the robot.
Downloaded from www.Manualslib.com manuals search engine