Specifications

- 4 -
Installation, Operation and Care of
MAGIC-FIN HEAVY DUTY GAS CHAR BROILERS
MODELS GHMCB34 & GHMCB51
KEEP THESE INSTRUCTIONS
GENERAL
The manufacturer suggests that you thoroughly read this entire manual and carefully follow all of the
instructions provided.
Your Vulcan Gas Char Broiler is produced with quality workmanship and material. Proper installation,
usage and maintenance of your broiler will result in many years of satisfactory performance.
INSTALLATION
UNPACKING
This char broiler was inspected before leaving the factory. The transportation company assumes full
responsibility for safe delivery upon acceptance of the shipment. Immediately after unpacking, check
for possible shipping damage. If the broiler is found to be damaged, save the packaging material and
contact the carrier within 15 days of delivery.
Remove all shipping wire, wood blocking, top grid grates, burner radiants, burners, manifold cover,
grease collector tray and lower panel.
Before installing, verify that the type of gas supply (natural or propane) agrees with the specifications
on the rating plate which is located on the lower front panel. If the supply and equipment requirements
do not agree, do not proceed with the installation. Contact your dealer or Vulcan-Hart immediately.
LOCATION
This char broiler is for use in non-combustible locations ONLY! The equipment must be kept clear of
any combustible constructions or substances.