Service manual

OPERATION
3-18
April 2001
Part No. 001-9800-203
With low tier models, it is selected by pressing the
AUX1 or AUX2 switch programmed for that function.
Refer to Section 3.5.9 for more information.
3.6.12 HORN ALERT
When an external alert such as the vehicle’s horn
or lights is used to signal an incoming call, the menu
HRN ALRT parameter or an option switch
programmed for horn alert can be used to turn this
feature on and off. Refer to Section 3.5.10 for more
information.
3.6.13 LTR SYSTEM SEARCH SELECT
The menu SYS SRCH parameter allows the LTR
system search feature to be turned on and off by the
user. When it is on, the transceiver automatically
searches for another system when an out-of-range
condition occurs when making an LTR telephone call.
Refer to Sections 3.8.5 and 3.8.8 for more
information.
3.6.14 MENU MODE SELECT
The menu mode is selected by pressing the FCN
switch twice within 8 seconds. Refer to Section 3.6.2
for more information.
3.6.15 MONITOR MODE SELECT
When a conventional system is selected, an
option switch programmed for the monitor function
selects the monitor mode described in Section 3.9.1.
This mode disables Call Guard squelch or other
squelch control features so that all messages occurring
on a channel are heard. The monitor mode is indicated
by in the display (high tier only).
3.6.16 OPTION SELECT
The OPTION menu parameter or an option switch
programmed for option select can be used to control
some type of dealer-defined accessory. When the
menu parameter is used, “ON” selects the enabled
condition and “OFF” selects the disabled condition
( is not displayed). Refer to Section 3.5.11 for more
information.
3.6.17 PRIORITY SAMPLING SELECT
The PRIORITY menu parameter or an option
switch programmed for that function enables or
disables priority group sampling on conventional
systems. Refer to Section 3.9.6 for more information.
3.6.18 SCAN ON-OFF
The SCAN option switch enables and disables
scanning. With high tier models, the type of scanning
is selected by the SCN TYPE menu parameter or
programming. Refer to Section 3.7 for more
information.
3.6.19 SCAN TYPE SELECT
The SCN TYPE menu parameter selects the type
of scanning that occurs when it is enabled by the
SCAN option switch. The following types are avail-
able. Refer to Section 3.7 for more information.
SYS-GRP - Both system and group
GRP ONLY - Group scanning only
OFF - Both system and group scanning off
3.6.20 SCAN CONTINUE SELECT
A scan continue timer can be programmed which
limits the amount of time spent monitoring a message.
The menu SCN CONT parameter can be used to turn
this feature on and off. When “ON” is selected, this
timer is enabled, and when “OFF” is selected, entire
messages are always received. Refer to Section 3.7.3
for more information.
3.6.21 SCAN LIST SAVE MODE
The SCN SAVE menu parameter determines if
changes made to the system and group scan lists are
saved as they are made. Changes are saved when
“ON” is selected, and they are not saved when “OFF”
is selected. See Section 3.7.2 for more information.
3.6.22 STEALTH MODE SELECT
The Stealth option switch or menu STEALTH
parameter enables or disables the stealth mode avail-
able with high tier models only. This mode disables