Service manual

OPERATION
3-16
April 2001
Part No. 001-9800-203
Table 3-2 Menu Mode and Option Switch Functions
Function
Menu Items
(High Tier Only)
Option Switch
Low Tier High Tier
Add/delete (scan list prg) - Fixed A/D
Backlight adjust BACKLGHT - -
Bank select BANK SEL - -
Call Guard sq. disable - CG
Emergency - - EMER
Encryption on-off ENCRYPT AUX1/AUX2 ENCPT
Function select - - FCN
Home sys/grp select - AUX1/AUX2 FCN then press
Sel Sw
Horn Alert on-off HRN ALRT AUX1/AUX2 HORN
LTR system search SYS SRCH - -
Menu mode select - - FCN (twice)
Monitor mode select - AUX1/AUX2 MON
Option select OPTION AUX1/AUX2 AUX
Priority sampling on-off PRIORITY AUX1/AUX2 PRI
Scan on-off - Fixed SCAN
Scan type select SCN TYPE - -
Scan continue on-off SCN CONT - -
Scan list save mode SCN SAVE - -
Stealth mode select STEALTH
(high tier only)
- STLH
Squelch adjust - AUX1/AUX2 FCN then
rotate Sel Sw
System/group display
mode select
S/G DISPL
(high tier only)
--
Talk-around on-off TALKARND AUX1/AUX2 TA
Tone type select TONES - -
NOTE: Parameters left blank are not available.
column of Table 3-2. Some functions can also be
controlled by programmable option switches (see
preceding section). Other highlights of menu mode
operation are as follows. Individual descriptions of
menu mode functions start with Section 3.6.5.
• Programming determines what functions are
displayed in the menu mode. If a function is
controlled by a menu parameter, it cannot be
controlled by the option switch and vice versa.
• Some functions can be set in a fixed condition by
disabling the option switch and menu item and then
programming the default condition in the menu for
the desired mode. However, if a parameter can be
changed by an option switch or menu parameter or
is automatically changed (such as the horn alert
described in Section 3.5.10), the programmed
default condition is maintained only until the first
time it is changed.
• Calls cannot be received or transmitted while in the
menu mode.
• Pressing any control other than the select switch
while in the menu mode produces an error tone.