Planning Guide

FILLER STRIPS
§ Attach between cabinets to separate cabinets and create turns
§ Sides are to be mounted flush with doors and not the cabinet face
§ Optional toe kick included
§ Two year outdoor warranty
VCF90
§ Each side is 2 3/4”W.
§ Corner filler strip for use in 90° cabinet bends
§ Shipping wt. 5 lb (2.3 kg)
VCF135
§ Each side is 2 3/4”W.
§ Corner filler strip for use in 135° cabinet bends
§ Shipping wt. 5 lb (2.3 kg)
VFLR4
§ 3 3/4”W.
§ General filler strip used to separate appliance based cabinets
§ Shipping wt. 5 lb (2.3 kg)
VFLR8
§ 8”W.
§ General filler strip used to separate appliance based cabinets
§ Shipping wt. 9 lb (4.1 kg)
VOCF90
§ Each side is 8”W.
§ Shipped with two unattached back panels
§ Outer corner filler strip used to connect two back panels at a 90°
angle and add countertop support
§ Shipping wt. 40 lb (18.1 kg)
VOCF135
§ Each side is 4”W.
§ Shipped with two unattached back panels
§ Outer corner filler strip used to connect two back panels at a 135°
angle and add countertop support
§ Shipping wt. 40 lb (18.1 kg)
8
CABINET SIDE PANELS
§ Heavy-duty stainless steel
§ Used to finish sides of base cabinets at the end of the cabinet run
§ Fit flush into recessed sides of cabinets
§ Optional toe kick included
§ Two year outdoor warranty
VSP30
§ 30”W. x 29 3/4”H. multi-use base
§ Shipping wt. 16 lb (7.3 kg)