Specifications

3
WARNING!!
ELECTRICAL GROUNDING INSTRUCTIONS
This appliance must be electrically grounded in accordance with local codes or, in the absence of codes, with the
National Electrical Code, ANSI/NFPA 70-latest edition. Installation should be made by a licensed electrician.
FFOORR PPEERRSSOONNAALL SSAAFFEETTYY,, TTHHIISS AAPPPPLLIIAANNCCEE MMUUSSTT BBEE PPRROOPPEERRLLYY GGRROOUUNNDDEEDD
The power cord on this unit is equipped with a three-prong (grounding) plug which mates with standard three-prong
(grounding) wall receptacles. If there is any doubt as to whether the wall receptacle is properly grounded, the customer
should have it checked by a qualified technician.
DO NOT UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD (GROUND) PRONG FROM THE POWER
PLUG.
INSERTION OF UNIT
Prepare the cabinet according to the cut-out infomration. Slide the uncartoned unit to the installation location on its
shipping base. Remove the base and lift and slide the unit 2/3 of the way into the cabinet. Remove the 2 stringers
from the bottom of the unit and slide it the rest of the way into the cabinet.
CAUTION
To prevent possible damage to cabinets and cabinet finishes, use only materials and finishes that will withstand
temperature up to 190
o
F (88
o
C), and that are moisture resistant. When cabinets are covered with laminates, an
appropriate heat-resistant adhesive must be used. Consult your cabinet manufacturer for proper specifications.