Specifications

ManualsBrandsViking ManualsBurnerVGSC367-6B

100

PROFESSIONAL

DESIGNER

HOOD

DATA

MODEL NUMBER

MAX DUCT RUN

120 V/60 HZ MAX AMPS

50 FEET (15.2M)

75 FEET (22.9M)

40 FEET (12.2M)

50 FEET (15.2M)

4.0

5.7

3.0

CFM

RECOMMENDED DUCT SIZE

300

440

600

880

900

1200

1500

500

900

1200

7" ROUND

10" ROUND

X10" CAN

TRANSITION TO 6" ROUND

10" ROUND

FOR

USE

WITH

HOODS

DIV300

(INTERIOR)

VIV300

(INTERIOR)

DIV440

(INTERIOR)

DIV600

(INTERIOR)

VIV600

(INTERIOR)

DIV880

(INTERIOR)

DEV900

(EXTERIOR)

VEV900

(EXTERIOR)

DIV1200

(INTERIOR)

VIV1200

(INTERIOR)

DEV12

(EXTERIOR)

VEV1200

(EXTERIOR)

DEV1500

(EXTERIOR)

VEV1500

(EXTERIOR)

FOR

USE

WITH

DOWNDRAFTS

VIDV500

(INTERIOR)

VEDV900

(EXTERIOR)

VEDV1200

(EXTERIOR)

PROPER INSTALLATION/DU

CTTING IS EXTREMELY IMPORTANT TO ENSURE MAXIMUM PERFORMANCEE FROM ANY VENTILATION PRODUCTT

•

ALL CFMS STATED BASED ON TESTS WITH .1 STATIC PRESSURE: WITHOUT APPLYING STATIC PRESSURE (SOME BRANDS

CONSCIOUSLY DO NOT), CFM COULD BE GREATLY OVERSTATED.

•

DUCT RUN LENGTH IS FOR GENERAL REFERENCE ONLY; FOR LONGER DUCT RUNS, INCREASE DUCT SIZE AND CONTACT A

QUALIFIED AND TRAINED INSTALLER.

•

STRAIGHT RUNS AND GRADUAL TURNS ARE BEST; FOR EXAMPLE, EACH 90

ELBOW IS EQUIVALENT TO 5-10 FEET (1.52-

3.05CM)

OF STRAIGHT RUN.

•

NEVER USE FLEXIBLE DUCT; IT CREATES BACK PRESSURE/AIR TURBULENCE AND GREATLY REDUCES PERFORMANCE.

•

PROPER PERFORMANCE IS DEPENDENT UPON PROPER DUCTING; MAKE SURE THAT A QUALIFIED AND TRAINED INSTALLER IS USED.

•

CHECK WITH A QUALIFIED AND TRAINED INSTALLER OR LOCAL CODES FOR MAKEUP AIR REQUIREMENTS, IF ANY.

•

MAX. AMP RATING FOR HOODS INCLUDES RECOMMENDED VENTILATOR KIT RATING; ALL PRODUCTS MUST BE HARD WIRED DIRECT

WITH 2-WIRE WITH GROUND (REFER TO HOOD DATA CHART FOR MORE INFORMATION).

•

A 1200 OR 1500 CFM (IF APPLICABLE) VENTILATOR KIT SHOULD BE USED WHEN INSTALLED OVER RANGE/RANGETOPS WITH

GAS CHAR-GRILL.