Specifications

2
CUTOUT DIMENSIONS
Diagram A Description Dimension
A Width of lag bolt location 1” (2.54 cm)
B Distance from right side of cutout
to left lag bolt location 32 9/16” (82.7 cm)
C Width of receptacle location 27 1/2” (69.9 cm)
D Distance from right side of cutout
to right lag bolt location 3 3/8” 8.6 cm)
E Height to top of receptacle location and
bottom of 2” x 4” (5.1 cm x 10.2 cm)
mounting board (including cover plate) 80 1/2” (204.5 cm)
F Height to bottom of receptacle
location(including cover plate) 75 1/8” (190.8 cm)
G Height of cutout (min.) 84” (213.4 cm)
H Depth of water line location
on side wall 1” (2.54 cm)
I Position of water line location on
back wall 7 5/8” (19.4 cm)
J Width of water line location on
back wall 6 3/4” (17.1 cm)
K Height of water line location on side wall 5/8’ (1.6 cm)
L Height of water line location on
back wall 3” (7.6 cm)
M Depth of cutout (min.) 24” (61.0 cm)
N Do not place water line in this location 3 5/8” (9.2 cm)
O Width of water line location on floor 10 3/4” (27.3 cm)
P Water valve location See diagram
Q Depth of water line location on floor 10 1/2” (26.7 cm)
R Width of cutout (min.) 35 1/2” (90.2 cm)
Verify cutout depth is a minimum of 24” (61.0 cm) measuring from the rear of the cutout to the front. Minimum
refrigerator height is 83 1/4” (211.5 cm)with refrigerator adjusted to its lowest position. Maximum refrigerator height is
84 1/4” (214.0 cm) with refrigerator adjusted to its tallest position. Customize the installation if cutout height is more
than 84 1/4” (214.0 cm)and no cabinets are installed above the refrigerator. The electrical outlet must be installed
from 75 1/8” (190.8 cm) to 80 1/2” (204.5 cm) high and 0” to 21 1/2” (54.6 cm) from right side of cutout when facing
cutout.