Specifications

ManualsBrandsViking ManualsConsumer electronicsTBB-1A

C. Security Code (memory location #19)

The security code allows the user/installer to program the 1600A series phone while DIP switch 3 is in the ON (normal) position.

The factory set security code is 845464 (V-I-K-I-N-G). It is recommended that the factory set security code be changed. Example:

To store 123456 as the security code:

Enter Your Security Code Here:

#19

Step 1. Access programming as shown is Programming section A.

Step 2. Enter 123456 #19..

Step 3. Hang-up.

Note: The security code must be 6 digits and cannot include a

or a #.

D. Speed Dial Numbers

The emergency speed dial number programmed in location #00 is the number that is dialed

when the “HELP” / ”CALL” button is first pressed. Additional speed dial numbers will be

dialed when there is no answer or a busy signal is detected and the next number redial fea-

tures are activated. To program, enter the desired speed dial number followed by the loca-

tion number (#00 - #04). To clear a speed dial location, simply enter the memory location

(#00 - #04) alone. The 1600A series phone is factory set with no speed dial number pro-

grammed.

1. Emergency Speed Dial Numbers (memory locations #00 - #04)

Note: Up to 20 digits can be stored in each dial position. Special features such as pause, mode change, Touch Tone

and # count

as single digits.

To Program:

4 second pause

switch to pulse mode

0, 1, 2...9

Enter:

0, 1, 2...9

E. Identification Number (memory location #20)

The Touch Tone I.D. number (up to 20 digits) is used by emergency personnel to identify the location of the caller and

is given out when the receiving party presses a Touch Tone Q. The security office can display the number using a

Touch Tone decoder. To program the I.D. number, enter the desired number followed by #20. Example: To store 333

as the I.D. number, enter: 3 3 3 # 2 0

To Program the 1600A Series Phone...

...to store 555-1234 as the first emergency speed dial number

...to store a Touch Tone 9, a four second pause and then a pulse

dialed 333-4444 into the second “Info” speed dial memory position

...to clear the first emergency speed dial number

Step 2 - Enter Digits:

5 5 5 1 2 3 4 # 0 0

Q7 Q6 3 3 3 4 4 4 4 # 0 8

# 0 0

Step 1 -

See Section A

Enter Programming

2. “INFO” Speed Dial Numbers (E-1600A-BLT2-EWP) (memory locations #07 - #09)

The information speed dial number programmed in location #07 is the telephone or extension number that is dialed

when the “INFO” button is first pressed. Additional information speed dial numbers will be dialed when there is no

answer and the next number redial feature is activated. The E-1600A-BLT2-EWP phone will cycle through the pro-

grammed speed dial numbers until answered. To program, enter the desired speed dial number followed by the

location number (#07 - #09). To clear a speed dial location, simply enter the location (#07 - #09) alone.

3. Speed Dial Programming Examples