Specifications

Many new building codes require emergency communication in elevators and “Area of Refuge”
sites. Now you can provide added safety for your patrons, employees, and students with the
addition of high visibility, ADA Compliant emergency communication. At the simple push of a but-
ton, the E-1600A-BLT-EWP will initiate a call to your emergency personnel and send a digital
announcement to identify the location of the emergency call. In addition, the tower phone’s bright
LED strobe light will instantly begin flashing to deter further activity and make it fast and easy for
Police or Security personnel to locate the site of the emergency. The strobe light can also be pro-
grammed to provide a continuous-on lower intensity beacon when the emergency phone is not
in use.
Though the strobe requires external power to operate, rest assured that communication is pos-
sible, even during power failures! All phone numbers, location numbers and programming
parameters are stored in non-volatile memory. No batteries are required to hold the memory.
The E-1600A-BLT-EWP and E-1600A-BLT2-EWP are equipped with Enhanced Weather
Protection (EWP) for outdoor installations where the unit is exposed to precipitation or conden-
sation. EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt
connectors, as well as urethane or thermal plastic potted circuit boards with internally sealed,
field-adjustable trim pots and DIP switches for easy on-site programming. For more information,
see DOD# 859.
P
P
r
r
a
a
c
c
t
t
i
i
c
c
e
e
T
T
E
E
L
L
E
E
C
C
O
O
M
M
S
S
O
O
L
L
U
U
T
T
I
I
O
O
N
N
S
S
F
F
O
O
R
R
T
T
H
H
E
E
2
2
1
1
S
S
T
T
C
C
E
E
N
N
T
T
U
U
R
R
Y
Y
Phone Power: Telephone line powered. Minimum 24V DC talk battery
voltage, with a minimum loop current of 20mA. Loop current may be
boosted on low current lines with a Viking Model TBB-1B talk battery
booster (DOD# 632)
Beacon/Strobe Power: 120V AC/12V DC power adapter (included)
Maximum Strobe Power Run: 200 feet using 24 awg wire
Dimensions: 1070mm x 152.4mm x 109.3mm (42” x 6” x 4.5”)
Shipping Weight: 9.1 kg (20 lbs)
Mounting: Surface mount to rigid wall or post
Environmental: -26°C to 54°C (-15°F to 130°F) with 5% to 95% non-con-
densing humidity
Strobe Flash Rate: 60 flashes per minute (default) see Strobe Flash
Patterns on page 7
Maximum Power Supply Run Length on CAT-5: 1 pair = 125 ft, 2 pair
= 225 ft, 3 pair = 325 ft, 4 pair = 475 ft
Material: Enclosure - .125 aluminum, 76.2mm x 152.4mm (3” x 6”) tube,
powder painted high-visible yellow, Phone - .074 (14 gauge) 316 Marine
grade stainless steel with stainless steel button, Strobe - Vandal resistant
polycarbonate plastic
Connections: Color-coded wires with gel-filled butt connectors
• Campus Security Sites
• Area of Refuge sites
• Parking Ramps/Lots
• Automated Tellers (ATM)
• Entryways
• Roadside Emergency Sites
• Stairwells in Public Buildings
TECHNICAL
TECHNICAL
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
S
S
p
p
e
e
c
c
i
i
f
f
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
ADA Compliant Emergency Tower Phone with
Blue Steady On LED Beacon & Strobe Light
E-1600A-BLT-EWP
E-1600A-BLT-EWP
E-1600A-BLT2-EWP
E-1600A-BLT2-EWP
ADA Compliant Emergency Tower
Phone with LED Strobe & Beacon
October 23, 2013
• Enhanced Weather Protection (EWP), EWP products are designed
to meet IP66 Ingress Protection Rating, see DOD# 859
• Meets ADA requirements for Emergency Phones:
- Can automatically light the “Call Connected” LED for the
hearing impaired
- Transmits a unique location I.D. code or voice announcement
- Grade 2 Braille label for the visually impaired
• 16 second non-volatile digital voice announcer
• High power LED strobe and beacon visual indicator:
- High output / long life LED technology
- Four programmable flash patterns: single, double, quad and flicker
- 6 programmable beacon and strobe brightness settings
• Advanced call progress detection
• Handsfree operation
• Phone line powered emergency phone (strobe requires power)
• Non-volatile memory (no batteries required)
• Marine grade 316 stainless steel and powder coated aluminum to
prevent corrosion
• Dials up to 5 emergency numbers
• Cycles through backup emergency and non-emergency numbers on
busy or no-answer
• E-1600A-BLT2-EWP can also dial up to 3 non-emergency “Info”
numbers
• Hangs up on CPC, silence, busy, dial tone, time-out or touch tone
• Programmable to auto-answer on incoming calls
• Remotely programmable
• Central Station Monitoring capability (dials 2 numbers)
• Separate central station voice speed dial number
• Optional PB-100 Polling System available
• Surface mountable
F
F
e
e
a
a
t
t
u
u
r
r
e
e
s
s
P
P
h
h
o
o
n
n
e
e
.
.
.
.
.
.
7
7
1
1
5
5
.
.
3
3
8
8
6
6
.
.
8
8
8
8
6
6
1
1
CAUTION - When installing on an analog extension of a phone system: Some phone
systems do not conform to analog telecom standards and might not be compatible with the
1600A Series emergency phones. For a detailed description of the telephone line specifica-
tions required for any of the 1600A Series phones, retrieve DOD# 869.
E-1600A-BLT-EWP E-1600A-BLT2-EWP