Installation Instructions

Performance Checklist
A qualified installer should carry out the following checks:
□ Check oven Bake Function—bake element on full power, center and outside broil elements
at partial power. Convection
Bake function—bake and broil elements the same with the convection fan “ON”.
□ Check TruConvec™ function—TruConvec element (behind convection fan cover) “ON” and
convection fan “ON”.
□ Check High Broil function—both broil elements at full power. Convection broil function is the
same with convection fan “ON”.
□ Check Medium Broil function—inner and outer broil elements pulse on and off.
□ Check Low Broil function—inner broil element only.
□ Check Self-Clean function—Door will lock
in approximately 30 seconds, the center and outside broil elements will turn “ON” and the
bake element will turn “ON” at partial power. Check broil elements through window to
make sure they are “ON”, then abort self-clean cycle to unlock door.
Any adjustments necessary that are a result of the installer not following instructions will be the
responsibility of the installer, dealer, or the end user of the product.
14
CAUTION
DO NOT run self-clean cycle check for
more than 10 minutes with the oven racks
and rack supports inside oven to avoid
discoloration due to the high temperature.
Electronic
Timing Center
Off/On
Indicator Light
Interior
Oven Li
g
ht Control
Temperature
Control
Self-Clean
Indicator Light
Oven Function Selector
RVSOE/RVDOE