Use and Care Manual

25
Troubleshooting
Problem Possible Cause and/or Remedy
Range will not function. Range is not connected to electrical power: Have electrician check
power circuit breaker, wiring, and fuses.
Broil does not work. Temperature control knob is rotated too far past broil position.
Oven light will not work. Light bulb is burned out.
Range is not connected to power.
Igniters will not work. Circuit is tripped.
Fuse is blown.
Range is not connected to power.
Igniters sparking but no  ame ignition. Gas supply valve is in “OFF” position.
Gas supply is interrupted.
Igniters sparking continuously after
 ame ignition.
Power supply is not grounded.
Power supply polarity is reversed.
Igniters are wet or dirty.
Burner ignites but  ame is large, distorted, or
yellow.
Burner ports are clogged.
Unit is being operated on wrong type of gas.
Air shutters not properly adjusted.
Strong odor and/or smoke is noticed  rst few
times oven is used.
This is normal burn o of insulation and protective oils in oven. This
will go away after using oven a few times.
Oven indicator light on; oven will not heat. Oven is operating properly. Unit will resume heating
function once it has cooled.