Use and Care Manual
23
Replacing Oven Lights
WARNING
  ELECTRICAL SHOCK HAZARD
 Disconnect the electric power at the main 
fuse or circuit breaker before replacing 
bulb.
WARNING
DO NOT touch bulb with bare hands. Clean o any 
signs of oil from the bulb and handle with a soft 
cloth.
DO NOT touch bulb with bare hands. Clean o  any signs of oil from the bulb and handle with a soft cloth.
1. Unsnap glass light cover using a screwdriver in the 
access groove.
2. Firmly grasp light bulb and pull out.
3. Replace with halogen bulb using volt and wattage 
requirements listed on glass cover.
4. Replace the light cover by snapping glass cover onto 
metal box.
5. Reconnect power at the main fuse or circuit breaker.
glass light 
cover
access 
groove
light 
bulb
Cleaning and Maintenance










