Use and Care Manual
10
Rack Positions
Each oven is equipped with three tilt-proof racks. 
All ovens have six rack positions. Position 6 is the 
farthest from the oven bottom. Position 1 is the 
closest to the oven bottom. The racks can be easily 
removed and arranged at various levels. For best 
results with conventional baking, DO NOT use more 
than one rack at a time. It is also recommended, 
when using two racks, to bake with the racks in 
positions 2 and 4 or positions 3 and 5.
Broil element
Oven light
6
5
4
3
2
1
TruConvec™ element
(behind baffle)
(3) Oven racks
Concealed bake element
Oven Features
Conventional and Convection Cooking
Because of variations in food density, surface texture and consistency, some foods may be prepared more successfully using the 
conventional bake setting. For this reason, conventional baking is recommended when preparing baked goods such as custard. 
The user may  nd other foods that are also prepared more consistently in conventional bake. It is recommended to use this 
function for single-rack baking. Convection cooking is a cooking technique which utilizes fan-forced air to circulate throughout 
the entire oven cavity creating the optimum cooking environment. Cooking with convection is intended when performing multi-
rack baking and for heavier foods. Below are some tips which will allow you to get the best results out of your oven when cooking 
with convection.
• As a general rule, to convert conventional recipes to convection recipes, reduce the temperature by 25°F (10°C) when using a 
convection cooking function.
• Cooking times for standard baking and convection baking will be the same. However, if using convection to cook a single item or 
smaller load, then it is possible to have 10-15% reduction in cooking time. (Remember convection cooking is designed for multi-
rack baking or cooking large loads.)
•If cooking items which require longer than 45 minutes, then it is possible to see a 10-15% reduction in cooking time.
• A major bene t of convection cooking is the ability to prepare foods in quantity. The uniform air circulation makes this possible. 
Foods that can be prepared on two of three racks at the same time include: pizza, cakes, cookies, biscuits, mu ns, rolls, and 
frozen convenience foods.
• For three-rack baking, use any combination of rack positions 2, 3, 4, and 5. For two-rack baking, use rack positions 2 and 4 or 
positions 3 and 5. Remember that the racks are numbered from bottom to top. 
Using the Oven
Preheat
For best results, it is extremely important that you preheat your oven to the desired cooking temperature before placing food 
items in the oven to begin cooking. In many cooking modes, partial power from the broiler is used to bring the oven to the 
preheat temperature. Therefore, placing food items in the oven during the preheat mode is not recommended. The Viking Rapid 
Ready™ Preheat System is engineered so that the oven is brought to the desired set temperature in a manner which will provide 
the optimum cooking environment based on the selected cooking mode in the shortest possible time.
For instance, the preheat mode for TruConvec™ is designed to be brought up to the set point temperature in a di erent manner 
than the preheat mode for conventional bake. This is because TruConvec is designed for multi-rack baking. So it is extremely 
critical that all rack positions have reached the desired cooking temperature. As a result, it is normal for oven to take slightly 
longer for the oven to preheat to 350°F in TruConvec mode when compared to the amount of time it takes to preheat the oven 
cavity to 350°F in conventional bake mode. 
Also, preheat time can vary based on some external factors such as room temperature and power supply. A signi cantly colder 
room temperature or a power supply less than 240 VAC can lengthen the time it takes for the oven to reach the desired set 
temperature.










