Specifications

2120
1
(
A)
(
A
)
2
(
A
)
(A)
+
1
/
2
+1/2”
(
1
.
3
c
m
)
(1.3 cm)
(
A
)
+
1
/
2
(
1
.
3
c
m
)
3
-
5
/
8
3-5/8”
(
9
.
2
c
m
)
(9.2 cm)
3
-
5
/
8
(
9
.
2
c
m
)
Measure from floor to bottom
of the anit-tip opening located on the back of range.
This will be measurement (A).
Locate anti-tip bracket on rear wall with the top left corner at
measurement (A) plus 1/2” (1.3 cm) from the floor and 3-5/8” (9.2 cm)
from where the right side of range (facing range) is to be located.
3
Mark and drill holes where bracket
will be located.
1
8
-
1
/
2
8-1/2”
(
2
1
.
6
c
m
)
(21.6 cm)
8
-
1
/
2
(
2
1
.
6
c
m
)
Ø
1
/
8
Ø 1/8”
(
.
3
2
c
m
)
(.32 cm)
Ø
1
/
8
(
.
3
2
c
m
)
1-
1
/
2
1-1/2”
(
3
.
8
c
m
)
(3.8 cm)
1
-
1
/
2”
(
3
.
8
c
m
)
Locate anti-tip bracket hook on the floor
8-1/2” (21.6 cm) from side cabinet and 1-1/2” (3.8 cm) from rear wall.
Mark and drill 1/8” (.32 cm) holes where bracket will be located.
1
1
2
2
Mount anti-tip bracket hook to floor
using screws provided.
7
Set the high corner of range so that the top of side trim is
3/8” (0.95 cm) above countertop. Level range to high corner.
Anti-tip Device Installation
WARNING
TIPPING HAZARD
THIS RANGE CAN TIP.
A CHILD OR ADULT CAN TIP
THE RANGE AND BE KILLED.
FAILURE TO INSTALL THE
ANTI-TIP DEVICE CAN
RESULT IN DEATH OR
SERIOUS BURNS TO
CHILDREN OR ADULTS.
IF THE RANGE IS MOVED THEN THE
ANTI-TIP DEVICE MUST BE
RE-ENGAGED.
WARNING
TIPPING HAZARD
To reduce the risk of the
appliance tipping, it must be
secured by a properly installed
anti-tip bracket(s). To make sure
the bracket has been installed
properly, look behind the range
with a flashlight to verify proper
installation engaged in the rear
top left corner of the range or under the range
to verify that a floor hook and bracket have
been installed.
Your range is shipped standard with two
types of anti-tip devices.
Type 1 is a wall mount device
which can be used for all
installation applications.
Type 2 is a floor mount
device which can be used for
all applications other than
when the range is installed
on a concrete sub-floor.
Important The range MUST be installed
with one of the anti-tip devices.
1
2
4
Attach bracket with
mounting hardware provided.
Wall Mount Anti-tip Installation Floor Mount Anti-tip Installation
Leveling/Adjustments/Alignment (cont.)