Service manual

22956 Highway 61 Morley, MO 63767 PH: 573-262-3545; FAX: [phone] www.vikingcives.com
New LD Manual 2 Revision 08
TABLE OF CONTENTS
DESCRIPTION: PAGE NO.:
WARRANTY POLICY/ORDERING PARTS 3
WARRANTY REQUEST PROCEDURE 4
INTRODUCTION 5
PERIODIC MAINTENANCE INSPECTION 5
DAILY INSPECTION AND LUBRICATION 5
REGISTRATION OF EQUIPMENT AND WARRANTY INFORMATION 6
2005 FORD INSTALLATION INSTRUCTIONS 7
DRAWING OF 2005 FORD ATTACH KIT 8
PARTS BREAK DOWN OF 2005 FORD ATTACH KIT 9
2005 thru 2008 GMC 4500 & 5500 INSTALLATION INSTRUCTIONS 11
DRAWING OF 2005 GMC 4500 & 5500 ATTACH KIT 12
PARTS BREAK DOWN OF 2005 GMC 4500 & 5500 ATTACH KIT 13
2008 FORD SUPER DUTY INSTALLATION INSTRUCTIONS 15
2008 FORD ATTACH KIT DRAWING 16
2008 FORD ATTACH KIT PARTS BREAKDOWN 17
2008 GMC ATTACH KIT DRAWING 18
2008 GMC ATTACH KIT PARTS BREAKDOWN 19
DRAWING OF SNO-KING (GEN. II) ASSEMBLY 20
PARTS BREAK DOWN OF SNO-KING (GEN. II) ASSEMBLY 21
DRAWING OF (GEN. II) LIGHT DUTY LIFT FRAME (4X4) 22
PARTS BREAK DOWN OF (GEN. II) LIGHT DUTY LIFT FRAME (4X4) 23
DRAWING OF (GEN. II) LIGHT DUTY LIFT FRAME (2X4) 24
PARTS BREAK DOWN OF (GEN. II) LIGHT DUTY LIFT FRAME (2X4) 25
LIGHT DUTY RECIEVER DRAWING AND PARTS BREAKDOWN 26-27
CUSHION VALVES W/ CENTRAL HYDRAULIC SYTEM 28
MAINTENANCE PROCEDURE FOR TIGHTENING NUTS ON SNOW PLOW CYLINDER 29
TORQUE ARM REMOVEL 30
MOLDBOARD/PUSHFRAME ASSEMBLY INSTRUCTIONS 31
DRAWING OF (GEN. 11) LIGHT DUTY PUSHFRAME ASSEMBLY 32
PARTS BREAK DOWN OF (GEN. II) LIGHT DUTY PUSHFRAME ASSEMBLY 33
DRAWING OF 9’ POLY MOLDBOARD 34
DRAWING OF 9’ STEEL MOLDBOARD 35
PARTS BREAK DOWN 8’ MOLDBOARD 36
PARTS BREAK DOWN 9’ MOLDBOARD 37
PARTS BREAK DOWN 10’ MOLDBOARD 38
DRAWING OF PLATE WASHER LAYOUT 40
PARTS BREAK DOWN OF PLATE WASHER LAYOUT 41
DRAWING OF TRIP HINGE 42
PARTS BREAK DOWN OF TRIP HINGE 43
DRAWING OF RUBBER DEFLECTOR 44
PARTS BREAK DOWN OF RUBBER DEFLECTOR 45
ELECTRICAL WIRING 46-50
WARRANTY PAGE 51