Specifications

The PA-2A provides loud ringing and paging to electronic key systems, 1A2 Key
systems, PABX’s as well as No-KSU phones and multiline phones.
Paging is accomplished by connecting the PA-2A to a paging port or unused tele-
phone line input (trunk port) of nearly any phone system.
The PA-2A will also generate an adjustable loud ringing from up to 6 C.O. lines or
from a dry contact closure. Either a loud electronic warble, or one of three other
soft chime sounds may be selected. An external “night transfer” switch can be
added to turn loud ringing on or off in night bell applications.
The PA-2A is easy to install and eliminates the installation of multiple bells, relays
and paging cards. The unit comes complete with a power supply, amplifier and (1)
paging horn.
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or
subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate
such changes.
Fax Back Doc 303
ZF301040 Rev C
Printed in the U.S.A.
P
P
r
r
o
o
d
d
u
u
c
c
t
t
S
S
u
u
p
p
p
p
o
o
r
r
t
t
L
L
i
i
n
n
e
e
.
.
.
.
.
.
7
7
1
1
5
5
.
.
3
3
8
8
6
6
.
.
8
8
6
6
6
6
6
6
F
F
a
a
x
x
B
B
a
a
c
c
k
k
L
L
i
i
n
n
e
e
.
.
.
.
.
.
7
7
1
1
5
5
.
.
3
3
8
8
6
6
.
.
4
4
3
3
4
4
5
5
8.
R
R
e
e
l
l
a
a
t
t
e
e
d
d
P
P
r
r
o
o
d
d
u
u
c
c
t
t
s
s
A. Remote Touch Tone Controllers
The RC-2A Remote Controller provides remote relay operation from any stan-
dard Touch Tone telephone.
The controller is designed to be installed either locally or remotely. For off-prem-
ise applications, the RC-2A will answer analog C.O. lines or PABX/KSU stations
after a selectable ring delay. A field programmable access code can also be pro-
grammed to prevent unauthorized usage. The RC-2A will then allow remote
relay operation.
The RC-3 enables a standard Touch Tone
phone to control up to 3 maintained ON,
maintained OFF, or momentary relay con-
tacts from a remote location. The RC-3 is
fully user programmable and uses non-
volatile memory.
Up to three RC-3’s can be daisy chained on the same line to control up to nine
relays. The RC-3 features switchable 12V talk battery allowing easy installation on
the trunk port. In addition, the unit can be connected directly to a C.O. line or ana-
log PABX/KSU station.
For more information on using the RC-2A or RC-3 in conjunction with the K-2000-
DVA see application note (Fax Back Document 830).
?
Need More Information on the RC-2A?
Call [phone] and select 160.
?
Need More Information on the RC-3?
Call [phone] and select 165.
Model RC-2A
Model RC-3
B. Paging Amplifier and Loud Ringer
?
Need More Information on the PA-2A?
Call [phone] and select 485.
Model PA-2A
The 25AE and 30AE paging speakers provide additional economical pag-
ing coverage to existing Viking paging units or to any system with an 8
ohm output.
In outdoor, factory or warehouse environments, 25AE paging horns are
the best method of producing understandable sound. In these environ-
ments the directional design allows the installer to focus the sound cone
down aisles and toward work areas.
In office and restaurant environments, it is best to distribute sound more
evenly. Ceiling mounted 30AE speakers in close proximity offer the best
distribution and are cost effective.
C. Cost-Effective Speakers
?
Need More Information on the 25AE or 30AE?
Call [phone] and select 498.
Model 25AE
Model 30AE