Specifications

ManualsBrandsViking ManualsBattery ChargerK-2000-DVA

B. Quick Programming Features

Entering phone numbers for each input ..................................................................

To play message for any input .................................................................................

Contacts: First digit - 0 = NO, 1 = NC , 2 = enabled, 3 = disabled

Second Digit - 0 = momentary closure, 1 = continuous closure ..............

Repeat/Lap Counter: First two digits - message repeat counter (01-99)

Last two digits - lap counter (01-99) ......................................

To program the Qualifier Timer (HHMMSS, 18 hour maximum) ...............................

To program the Resume Operation Timer (HHMMSS, 18 hour maximum) ...............

To program the Security Code .................................................................................

To program the Access Code ...................................................................................

To program the Ring Delay (0-9) ...............................................................................

To program the Ringback Limit ................................................................................

To program the Forced Play Timer (01-99 seconds) (00 = clear) .............................

To record messages for each input (1-8) ..................................................................

To add a 4 second pause anywhere in the dialing string ...........................................

To add a

✱ anywhere in the dialing string .................................................................

To add a # anywhere in the dialing string ..................................................................

To set to Alarm Dialer Mode ......................................................................................

To set to Store Caster Mode .....................................................................................

To set to normal dialing speed ..................................................................................

To set to fast dialing speed .......................................................................................

To hang up ................................................................................................................

To return programming to defaults ............................................................................

* X is an input number (1-8) and Y is one of the 8 phone numbers (1-8) that can be dialed for this input.

0-32 digits

✱0X*

2 digits

4 digits

6 digits

1 digit

2 digits

✱1 - ✱8

✱9

✱✱

✱

##1

##2

##3

##4

##7

###

#XY*

#X9*

#X0*

✱*

#X#*

#90

#91

#92

#93

#94

Enter Digits

then

- then -

Enter Memory Location

C. Factory Default Settings

Security Code

Access Code

Alarm Dialer Mode

Storecaster Mode

Phone Numbers

Messages

Ring Delay

Ringback Limit

845464 (V-I-K-I-N-G) (see section D)

123456 (see section F)

Enabled (see section E)

Disabled (see section E)

Not Programmed (see section O)

Not Recorded (see section P)

1 (see section G)

6 (see section H)

Call Progress Detection

Dialing Speed

Alarm Input

Configuration

Lap Counter

Message Repeat Counter

Qualifier Timer

Resume Timer

Enabled (see section J)

Normal (see section I)

N/O (Enabled) Momentary

(see section K)

1 (see section L)

2 (see section L)

0 - disabled (see section M)

0 - disabled (see section N)

E. Selecting Function

The K-2000-DVA can function as either an Alarm Dialer or a Storecaster. To select the Alarm Dialer mode enter ##1.

To select the Storecaster mode enter ##2.

F. Access Code

Enter a six-digit access code followed by #91. Note: The access code must use only the digits 0-9 and cannot con-

tain

✱

or #.

D. Security Code (memory location #90)

The security code allows the user/installer to

program the K-2000-DVA either locally or

remotely. The factory set security code is

845464 (V-I-K-I-N-G). It is recommended that

the security code be changed. Example: To

store 123456 as the security code:

Step 1. Access programming as shown in Programming section A.

Step 2. Enter 123456 #90.

Step 3. Exit Programming as shown in section A.

Note: The security code must be 6 digits and cannot include a

✱

or a #.

G. Ring Delay

Enter one digit from 0-9 followed by #92. If the ring delay is set to 0, ring detection is disabled, so that the K-2000-

DVA will not answer incoming calls. It is important to note that this prevents Remote Access and Remote Programming.

H. Ringback Limit (does not apply in Storecaster Mode)

Enter two digits from 01-99 followed by #93.

I. Selecting Dialing Speed (does not apply in Storecaster Mode)

To select normal dialing speed (120 ms) enter ##3. To select fast dialing speed (50 ms) enter ##4.