Specifications
P
P
r
r
o
o
g
g
r
r
a
a
m
m
m
m
i
i
n
n
g
g
A. Entering the Programming Mode
1. Local
Step 1. Move the PROG/NORM switch to PROG and plug an analog phone in to the TELCO jack.
Step 2. After taking the phone off hook, wait for two beeps.
Step 3. Program as shown in sections B-P.
Step 4. To exit programming, hang-up. Set the PROG/NORM switch to NORM.
2. Remote
Step 1. Make sure the PROG/NORM switch is set to the NORM position and that there is a CO line or analog PABX/KSU
extension in the TELCO jack.
Step 2. Call into the K-2000-DVA on that line or extension. The unit will answer after the set ring delay (see Programming
section E) and a single beep should be heard.
Step 3. Enter a
✱ and the six-digit security code (factory default is 845464). If the correct code is entered, two beeps
should be heard.
Note: The security code must be entered within 20 seconds otherwise the K-2000-DVA will time out and hang up.
When in programming, if 20 seconds elapse without Touch Tones being entered or a message being recorded, the
K-2000-DVA will automatically exit programming and hang up.
Step 4. Program as shown in sections B-P.
Step 5. To exit programming, hang-up or dial ##7. After the 20 second timeout has elapsed, the K-2000-DVA will be ready
for normal operation.
Note: Correct programming entries are implemented and then acknowledged by two beeps. Incorrect programming
entries are discarded and receive three beeps to indicate an error.
B. Store Caster
12V DC
Adapter
Included
120V AC
VIKING
©
MODEL K-2000-DVA
VIKING
ELECTRONICS
HUDSON, WI 54016
MULTI-INPUT VOICE
DIALER / ANNOUNCER
INPUTSTELCO PROGRAMMING
RS232
SERIAL PORT
POWER
12 VDC
AUDIO
OUT
ANNOUNCEMENT
VOLUME
PROG
Housewares
Greenhouse
Clothing
Automotive
Hardware
Paint
Plumbing
Electrical
Paging System
(not included)
NORM
25AE
Paging Horn
(not included)
4.
IMPORTANT: Electronic devices are susceptible to lightning and
power station electrical surges from both the AC outlet and the tele-
phone line. It is recommended that a surge protector be installed to pro-
tect against such surges. Contact Panamax at (800) 472-5555 or
Electronic Specialists Inc. at (800) 225-4876.
!








