Specifications

B. Quick Programming Features
To enter phone numbers for each input ....................................................................
To clear a phone number .........................................................................................
To enter pager numbers ...........................................................................................
To play message for any input .................................................................................
Contacts: First digit - 0 = NO, 1 = NC , 2 = enabled, 3 = disabled
Second Digit - 0 = momentary closure, 1 = continuous closure ..............
Repeat/Lap Counter: First two digits - message repeat counter (01-99)
Last two digits - lap counter (01-99) ......................................
To program the Qualifier Timer (HHMMSS, 18 hour maximum) ...............................
To program the Resume Operation Timer (HHMMSS, 18 hour maximum) ...............
To program the Security Code .................................................................................
To program the Access Code ...................................................................................
To program the Ring Delay (0-9) ...............................................................................
To program the Ringback Limit ................................................................................
To program the Forced Play Timer (01-99 seconds) (00 = clear) .............................
To record messages for each input (1-8) ..................................................................
To clear one message ..............................................................................................
To add a 4 second pause anywhere in the dialing string ...........................................
To add a
, anywhere in the dialing string .................................................................
To add a # anywhere in the dialing string ..................................................................
To set to Alarm Dialer Mode ......................................................................................
To set to Store Caster Mode .....................................................................................
To set to normal dialing speed ..................................................................................
To set to fast dialing speed .......................................................................................
To program no hookswitch flash before dialing ........................................................
To program a 500ms hookswitch flash before dialing ..............................................
To hang up ................................................................................................................
To return programming to defaults ............................................................................
* X is an input number (1-8) and Y is one of the 8 phone numbers (1-8) that can be dialed for this input.
1-32 digits
(no digits)
1-32 digits
,0X*
2 digits
4 digits
6 digits
6 digits
6 digits
6 digits
1 digit
2 digits
2 digits
,1 - ,8
,1 - ,8
,9
,,
,
#
##1
##2
##3
##4
##5
##6
##7
###
#XY*
#XY*
#
,XY*
#X9*
#X0*
#X
,*
#X#*
#90
#91
#92
#93
#94
Enter Digits
then
then
then
then
then
then
then
then
then
then
then
then
- then -
Enter Memory Location
C. Factory Default Settings
Call Progress Detection
Dialing Speed
Alarm Input
Configuration
Lap Counter
Message Repeat Counter
Qualifier Timer
Resume Timer
Hookswitch Flash
Before Dialing
Enabled (see section J)
Normal (see section I)
N/O (Enabled) Momentary
(see section K)
1 (see section L)
2 (see section L)
0 - disabled (see section M)
0 - disabled (see section N)
Disabled (see section Q)
E. Selecting Function
The K-2000-DVA can function as either an Alarm Dialer or a Storecaster. To select the Alarm Dialer mode enter ##1.
To select the Storecaster mode enter ##2.
D. Security Code (memory location #90)
The security code allows the user/installer to
program the K-2000-DVA remotely. The facto-
ry set security code is 845464 (V-I-K-I-N-G). It
is recommended that the security code be
changed. Example: To store 654321 as the
security code:
Step 1. Access programming as shown in Programming section A.
Step 2. Enter 654321 #90.
Step 3. Exit Programming as shown in section A.
Note: The security code must be 6 digits, cannot include a
, or a #, and cannot
be set the same as the remote access code.
5
then immediately press any digit
Security Code
Access Code
Alarm Dialer Mode
Storecaster Mode
Phone Numbers
Messages
Ring Delay
Ringback Limit
Pager Number
845464 (V-I-K-I-N-G) (see section D)
123456 (see section F)
Enabled (see section E)
Disabled (see section E)
Not Programmed (see section O)
Not Recorded (see section R)
1 (see section G)
6 (see section H)
Not Programmed (see section P)
F. Remote Access Code
Enter a six-digit access code followed by #91. Note: The remote access code must use only the digits 0-9, cannot
contain
, or #, and cannot be set the same as the security code.