User`s guide

13
Placing the bobbin
Turn off the power switch
1 Place the bobbin in the bobbin
case with the thread pulling off as
illustrated.
2 Guide the thread into the front
notch (a) on the front side of the
bobbin case. Draw the thread to the
left, sliding it between the tension
spring blades.
3 Continue to draw the thread lightly
until the thread slips into the side
notch (b).
4 Pull out about 10 cm (4”) of thread.
Attach the bobbin cover. Check the
threading by referring to the chart
shown on the bobbin cover.
a
b
1
2
3
4