User`s guide

1
10 - Buttonholes
1
The Exclusive SEWING ADVISOR™ feature will select the best
buttonhole and stitch settings for your fabric.
2
Fabric should be interfaced and/or stabilized where buttonholes are to
be sewn.
Select Sewing Mode.
3
On your Exclusive SEWING ADVISOR™, touch Woven
Medium.
4
Touch Buttonhole
5
B1:2 Bartack Buttonhole was selected.
6
Plug the cord of the Sensor One-Step Buttonhole Foot into the port
to the left underside in front of the Adjustable E LIGHT™ system.
Snap on the Sensor One-Step Buttonhole Foot.
7
To measure the button to determine the buttonhole size, place your
selected button on the buttonhole ruler on the DESIGNER
DIAMOND deLuxe™ baseplate.
8
Use the + or – on the Button size control on the Ultimate
Interactive Screen. to set the size of the button in millemeters (mm).
9
Before sewing the buttonhole, line up the white area on the side of
the wheel with the white marking line on the foot.
Stitch the bartack buttonhole B1:2.
DESIGNER DIAMOND deLuxe™ Techniques
#10 -Buttonholes
Perfectly Balanced Sensor One-Step Buttonhole