User`s guide

3
1 - Design Positioning
27
Lower the needle into the lower right corner of the fi rst design to check
placement.
28
If the needle is in the correct point in the design, touch OK to begin
embroidering.
29
If more adjustment is needed, touch Step 4 to rotate design into posi-
tion.
30
Watch the hoop move and rotate if needed until the needle is above the
fabric exactly where you want it. Use the stylus or Control arrows to
rotate design into the exact position.
31
Touch OK to go to Embroidery Stitch Out.
32
Touch Start/Stop and embroider the second design.
33
Repeat Design Positioning for more designs in this hooping or re-hoop
the fabric and use Design Positioning to match other designs.