Manual

ManualsBrandsViking ManualsHorn25AE

PRODUCT MANUAL

Designed, Manufactured and Supported in the USA

COMMUNICATION & SECURITY SOLUTIONS

Cost Effective Speakers for

Indoor and Outdoor Use

Features

The 25AE, 30AE, 35AE,

and 40AE paging

speakers provide

additional economical

paging coverage to

existing Viking paging

units (PA-2A, PA-15,

PA-30, PA-60, M2W) or

to any system with an 8

ohm output.

In outdoor, factory or

warehouse environments, 25AE paging

horns are the best method of producing

understandable sound. In these

environments the directional design allows

the installer to focus the sound cone down

aisles and toward work areas.

In office and restaurant environments, it is

best to distribute sound more evenly.

Ceiling mounted 30AE, 35AE, or 40AE

speakers in close proximity offer the best

distribution and are cost effective. The

35AE speakers include a volume control.

25AE Paging Horn

• Adjustable base for easy mounting and

directional adjustment

• Compact design for discreet mounting

30AE/35AE Ceiling Speakers

• Metal white grill for flush mounting in

office ceilings

• Mounting hardware included

• Excellent frequency response

• The 35AE includes a volume control

40AE Ceiling Speakers

• Attractive with a modern look

• Flush mounts into a 9.5” to 10” diameter

hole

• Integral mounting system

• Excellent sound quality

• Add additional speakers and coverage

area to existing paging systems such as

Viking models:

- PA-2A (DOD 485)

- PA-15 (DOD 486)

- PA-30 (DOD 489)

- PA-60 (DOD 493)

- M2W (DOD 480)

• Add speakers to the DVA-2WA

• For greater intelligibility and louder paging

see Viking model 300AE Paging Horn

(DOD 497)

See complete specifications on page 2.

25AE/30AE/

35AE/40AE

Paging Horn and

Ceiling Speakers

November 1, 2018

Applications

Specifications

www.VikingElectronics.com

Information: 715-386-8861

VIKING

30AE 35AE 40AE 25AE

Summary of content (4 pages)

PAGE 1
25AE/30AE/ 35AE/40AE Designed, Manufactured and Supported in the USA VIKING PRODUCT MANUAL Paging Horn and Ceiling Speakers C O M M U N I C AT I O N & S E C U R I T Y S O L U T I O N S November 1, 2018 Cost Effective Speakers for Indoor and Outdoor Use The 25AE, 30AE, 35AE, and 40AE paging speakers provide additional economical paging coverage to existing Viking paging units (PA-2A, PA-15, PA-30, PA-60, M2W) or to any system with an 8 ohm output.
PAGE 2
Specifications and Installation A. 25AE Paging Horn Nominal Power: 12 Watts Impedance: 8 Ohms Connection: 69“ 24 awg Pigtail wire Dimensions: 5” (127mm) diameter Shipping Weight: 1.5 lbs (.68 kg) Environmental: 5% to 95% noncondensing humidity Frequency Response: 600 Hz to 7000 Hz Mounting Plate Dimensions (3) 0.244” diameter holes 5.0" diameter 1.87” 2.44” 0.788” 0.788” 2.77” Installation: The 25AE paging horn is designed to be surface mounted to any rigid surface.
PAGE 3
Wiring Note: The 25AE paging horn is approximately 5dB louder than the ceiling speakers. Important: The 35AE ceiling speaker must be parallel wired. A. Series / Parallel B Speaker A will have approximately twice the volume of speaker B, as shown in the wiring diagram to the right. To Paging Amp A B. Parallel Similar speakers will have the same volume, as shown in the wiring diagram to the right. To Paging Amp C.
PAGE 4
Speaker Recommendations Ambient Noice Environment Level Typical Examples Ceiling Height Distance Between Speakers Quiet - Conversations very easily understood. 50dB Hotel lobby, hospital area, quiet office 9 ft 14 ft 35 ft 50 ft Normal - Conversations easily understood. 60dB Bank lobby, department store, auditorium 9 ft 14 ft 25 ft 35 ft Noisy - Voice must be raised to be understood.