Installation Guide Viking Range Corporation 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-845-4641 UL F20868A EN C UL (020113) 15”W./24”W.
IMPORTANT–Please Read and Follow! Table of Contents Warnings & Important Information____________________________________________________________3 Proper Disposal ______________________________________________________________________________4 Dimensions (15”W. Professional) ______________________________________________________________5 Dimensions (24”W. Professional) ______________________________________________________________6 Dimensions (24”W.
Proper Disposal (of old refrigeration unit) Dimensions DANGER 14 (37-7/8 ” .8 c RISK OF CHILD ENTRAPMENT Before You Throw Away Your Old Refrigeration Unit: • Take off the doors. • Leave the shelves in place so that children may not easily climb inside. (15”W. Professional) m) 34 30 -1 (76 .5 IMPORTANT: Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigeration units are still dangerous—even if they will sit for “just a few days”.
Dimensions Dimensions (24”W. Professional) (24”W. Professional) 23 23 (60-7/8 .6 ” c (60-7/8 .6 ” cm ) m) 30 (76-1/8 .5 ” cm ) 30 (76-1/8 .5 ” cm ) 34 (87-1/4 .0 ” mi cm) n. to 35 (89 ” .0 ma cm) x. 34 (87-1/4 .0 ” mi cm) n to . 3 (89 5” .0 ma cm) x. ” /16) 1 2 cm /6”) 1 2 cm 2 6.0 5 ( 2 .0 ” 16 -1/ ) (56 ” /16) 1 m 4 c 241.1 cm (6 ” 16 -9/cm) 6 2 7.5 2 1.1 6 ( ” /16) 9 m 6 c 2 7.5 6 (6 ( 50” (127.0 cm) area in which electrical outlet must be located 7-9/16” (12.9 cm) 40” (102.
Cutout Dimensions Specifications 15”/24”W. Undercounter/Freestanding Refrigeration Description Overall width Overall height 15” 24” 14-7/8” (37.8 cm) 23-7/8” (60.6 cm) 34-1/4” (87.0 cm) min. to 35” (89.0 cm) max. Overall depth from rear cabinet (with door panel) (with door handle) Cutout width 15” (38.1 cm) 24” (61.0 cm) Cutout height 34-1/2” (87.6 cm) min. to 35-1/2” (90.2 cm) max. Cutout depth 24” (61.
General Information General Information Preparing the Area Preparing Electrical Connections Make sure that the opening area where the unit is to be installed is properly prepared. Ensure the space dimensions and electrical service are correct for the models to be installed. All electrical instructions assume that outlet is located 4 to 10 inches from the floor. A 115 volt, 60Hz, 15 amp circuit breaker and electrical supply are required. A separate circuit is required for each unit installed.
Installation Anti-Tip Brackets WARNING Unit may tip forward if loaded racks/shelves are all pulled out at the same time. To prevent tipping and provide a stable installation, the unit must be secured in place with the anti-tip brackets provided with the unit. A set of metal anti-tip brackets are supplied with the unit. The anti-tip brackets, when properly installed should secure the rear legs and prevent the unit from tipping forward.
Installation Kickplate Installation (cont.) 6. Check interior door openings inside the cabinet to ensure the cabinet is level. Reinstall all shelving and drawers. Take extreme care to insert sliding shelving and sliding drawers squarely into slide brackets and proper slide bracket grooves. When sliding shelving and drawers are installed properly a click should be heard from both slide bracket retaining clips and should slide smoothly in the tracks.
Installation Checklist IMPORTANT: To ensure a safe and proper installation, review below items directly with installer. h Has all shipping tape, string and packing been removed? h Has the unit been secured in place with the provided anti-tip bracket or is the unit 1 inch or less from a solid soffit? h Are all levelers extended down to make contact with the floor? Service Information If service is required, call your dealer or authorized service agency.
18 19
