Instruction Manual

7. DISPOSAL
Properly dispose of all used gear units and internal parts
in accordance with all local regulations. In particular,
all lubricants must be properly collected and disposed.
MATERIAL DISPOSAL
For confirmation of specific materials used in a specific
reducer or gearmotor assembly, please consult NORD with
the appropriate unit identification or serial number.
Components Material
(FBSXIFFMTTIBGUTSPMMJOHCFBSJOHT
parallel keys, snap rings, spacers,
shims, etc.
Steel
(FBSIPVTJOHBOEIPVTJOH
components
Cast iron or Aluminum
(depending on type and size)
Worm gears Bronze alloy
Radial seals, sealing caps, and rubber
components
Elastomers with some steel
Coupling components Plastic or Elastomer with Steel
Housing gaskets and flat oil seals Asbestos-free sealing or gasket
material (various types used)
(FBS0JM Mineral, SHC-Synthetic or
1(4ZOUIFUJDDBOWBSZ
DRIVESYSTEMS
SAFETY NOTES
RETAIN FOR FUTURE USE
U10020 - 2 of 2
www.nord.com/docs06.09.09
NORD Gear Corporation
Toll Free in the United States: 888.314.6673
NORD Gear Limited
Toll Free in Canada: 800.668.4378